hojnowsr

thanks to all for the responseS !!!!!

got it going!!! TX to all for the comments

Hi everyone!!!toooooooooo hot to ride here in the East Other than the obvious (that is physically see if it fits) Can someone venture a guess as to whether a plow (classic country model) that I had on a 1995 Suzuki 4x4 will fit my newly purchased 2007/2008 used 400F Suzuki Eiger 4x4?? -Automatic... I have ALL the brakets and lift handle from the old quad. The guy I bought the old quad from said he got the plow from a Suzuki dealer and they put it on several years after he bought the quad so I am thinking it might be a universal set up???? Just thought I'd send this out for discussion. THANKS BOB

OXBLK can you send me the manual for a 2008 suzuki eiger??? TX BOB

Oxidized Black BINGO after all the several electrical items I fixed /or replaced-which were shot, the last item causing a problem was a bad connection at the battery--YOU WERE RIGHT-TX quad starting up A-OK

2008 400ltf manual TX

Hi I could use the 2008 suzuki 400ltf manual how do I get it from you?? TX BOB

For those techno folks out there!!!! How does one test the starter relay on a quad??? I am told that you can not test it unless it is on the unit??? @ the highest level one could say if the quad does not start the relay is shot BUT how does one test it electronically??? with a meter??? Thanks BOB

Could use some thoughts /help with this one PLEASE!!! When I depress the starter button (with the key turned on neutral lite on and oil light on) the quad does not start that is no juice gets to starter to engage it. BUT the elelectric at the consol cuts out/shuts off -lites neutral lite and oil lights go out AND the starter relay makes a funny sound and vibrates if you hold it. Then if I shut the key off and wait a minute or so and then turn the key back on the electric/juice comes back on. I am 100% sure jucie is getting to the starter relay in question the fuse is OK-does not blow out It appears it's resetting itself????? I am thinking that the starter relay --the unit next to the battery where 1 wire comes from the battery and the other goes to the starter is shot????????????????????????? I would take it to a shop but they are relativley far away and I'd have to leave the quad and then go back for it- time consuming and expensive I am sure????? SOOOOOOOOOOOOOOO could I PLEASE hear from the crowd on this???? Thanks ever so much- Elder statesman- BOB

tx for diagram figured out the quad is a 2008 and has a different wiring set up. Got missing relay from Ronnies , it came and is right BUT still will not fire up I know think the starter relay is shot. When I depress the started button the starter relay clicks and then the electric goes off. BUT comes back on in a few minutes --like some sort of relay resets itself--- shops are super busy and so I think I'll just buy a new starter relay and see it's the problem.

This is one of the best web sites I've ever joined!!! Not only do folks respond with help they are all freindly and honest!!!

Found part I need on Ronnie's TX to member who suggested that site!!!!

found out my quad was made in 07 but because of it's date of mfg'r it's considered an 08 --I think I found the part it's called a neutral relay and is part of the fise box. Rick's parts!!!

Found the part I need it's a Densco (sp?)relay that goes in the fuse box under the seat # 016700-4430 does anyone know where I can order it??/ TX BOB

trying to send image new in this forum. Can I send the pic to your cell phone??? I can not get it from my cell phone to my computer here. my cell is 609 -206-3569 tx BOB

Could the owner of a 2007 Suzuki eiger 400 4 x4 automatiic PLEASE take a picture of the fuse box that sits under the seat and send it to me????????via this forum I need to get a look at the whole fuse box--- that is both sides--side that holds fuses and the other half which I think is either open or houses a relay of some sort??? I think I am missing a relay ?????????? TX BOB:

Your right on the money!!! I am trying to find someone with the same quad a guy in this area just sold the same machine and I am trying to find him. still think it's the starter relay 1 shop said ok but I KNOW you can not "Bench" test (what he did) that item it must be on the unit. How do I find and get someone to do the picture thing off/from this web site???? TX BOB

2007 Eiger 400f 4 x 4 auto starting issues -------------------------------------------------------------------------------- Hello everyone Little help PLEASE!!!!!!!!!!!!!!! still working to get unit to fire up with new Ignition switch and found out starter slide and push button are OK (did so by using my trusty meter). Under the seat of this unit is a fuse box it APPEARS that half of it is missing??????????? one side has a cover that say's fuse box and in it are 8 fuses. The other half has exposed connections but no holder for fuses like the left side or any plug etc. there are 4 terminals in this "EXPOSED" section 1 has juice to it all the time and 3 are without juice. When I slide the bar to run and press the start button on the left steering handle I get a voltage reading from 1 of the 3 dead terminals showing me that voltage is comming out of that push button to the "exposed terminal. I traced a wire (which reads voltage when i depress the starter push button-I striped the wire at the handle) coming from the push starter buttom and it goes to 1 of the 4 terminals in the OPEN section and when I depress the push starter buttom I get voltage to that terminal Now am I to assume that because there is no fuse holder and fuses or a plug on the exposed side that is the reason that the starter is not engaging???????????? The voltage justs dead ends!!! TX BOB