Quantcast
Jump to content


2009 Honda TRX450r - Need Help Plz


Recommended Posts

I have had my trx for almost a year now its been working great i put a full hmf exhaust an air filter and i got a dyno jet kit stage 2 i followed the instructions and just changed the main jet ..its been working fine but i feel that it can go much faster at top speeds and it starts choking and popping at 5th gear max speed??? how can i stop that and get more top speed??open the airbox?? help plz

Link to comment
Share on other sites

well you can get spark plugs over the internet im not sure of the best place bc i get mine from a local shop but id recomend runnnin at least 93 premium gas in it...i have a fmf pipe an jet kit an a big bore and i ran the cheap stuff in it for about an hour and it did not like it it was poppin and choking untill i changged to 93 so id run premium gas and as far as plugs go ngk are prety good but id check around online as well

Link to comment
Share on other sites

You need to use the correct plug.. And as far as i know the only one that you can use is the NGK IFR8H11.

But as far as why its choking and popping in the top RPM range it could be the main jet is a little rich, you could try going down a size or 2 on the main jet and see if it helps..

Link to comment
Share on other sites

I have had my trx for almost a year now its been working great i put a full hmf exhaust an air filter and i got a dyno jet kit stage 2 i followed the instructions and just changed the main jet ..its been working fine but i feel that it can go much faster at top speeds and it starts choking and popping at 5th gear max speed??? how can i stop that and get more top speed??open the airbox?? help plz

I`d loose that Dyno jet kit and find a HRC jet Kit made for honda !! air box lid on or off ?? Your probably hittin your rev limiter at max speed !! you can also do the Green wire mod ! That gives you a xrta 1000 rpms !!

Edited by quadnut20
Link to comment
Share on other sites

I`d loose that Dyno jet kit and find a HRC jet Kit made for honda !! air box lid on or off ?? Your probably hittin your rev limiter at max speed !! you can also do the Green wire mod ! That gives you a xrta 1000 rpms !!

lid on....i feal that the bike can goo faster thats the iissue its hittin the rev limiter early> what is the green wire mod>>and will it cause any problems???

Link to comment
Share on other sites

You need to use the correct plug.. And as far as i know the only one that you can use is the NGK IFR8H11.

But as far as why its choking and popping in the top RPM range it could be the main jet is a little rich, you could try going down a size or 2 on the main jet and see if it helps..

soo it has nothin to doo with the jetting or ith the pilot jet

Link to comment
Share on other sites

You need to use the correct plug.. And as far as i know the only one that you can use is the NGK IFR8H11.

But as far as why its choking and popping in the top RPM range it could be the main jet is a little rich, you could try going down a size or 2 on the main jet and see if it helps..

if i poen the lid would it doo the job instead of goin down at the main jet

Link to comment
Share on other sites

as far as goin faster dude just get a big bore and make it a 490 or sumthin then you should have enough power to make you hap bc the little things arent gunna give you as much power or speed as it seems ur looking for, you could also experment with diff sprockets for more top end.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By Slitzer
      Hi,
      Thinking about to upgrade with a performance exhaust.
      Appreciate tips on brands and where to buy (ship to Europe)
    • By Clydaho
      2022 Sector 550, 414 miles on it and the gas gauge reads empty.  I topped off the gas and it didn't change.
      There is no fuse that I could find.  No access at the gauge cluster.
      Wiring on the top of the tank looks good, properly connected.
      Could the sending unit in the tank be stuck or broken?
      Has anybody removed the tank lid?  Any tricks?  
      Any other ideas?
      Thanks for any help,
      Clyde
    • By Admin
      View File 2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      Submitter Admin Submitted 04/09/2024 Category Honda ATV  
×
×
  • Create New...