Quantcast
Jump to content


New guy: 1986 Suzuki Quadsport - Issues


riotpolice

Recommended Posts

hows it going, my name is Brad and i recently bought a quadsport for 200 dollars i knew there was problems with it when i bought it but my dad and i are stumped at what the problems with it could be having owned multiple 4 wheelers

it burns oil and i knew that when i bought it, pure white smoke screen when i go down the trail its quite fun to smoke people out but its really starting to get on my nerves, my dad thinks it could be the rings but i have yet to tear it apart and see i want a second opinion before i waste my time doing it

it doesent idle at all, i have to keep on the gas when i start it up (if it even will start up its a pain to start) it almost seems like that the carb is clogged or something, the guy that owned it before me put some shitty supertrapp pipe on it and i think it also might have something to do with it im about to take the torch to it and cut the stupid thing off cause he welded right to the header pipe and run a straight pipe cause ive had no luck on trying to find a stock pipe for it.....the spark plugs come out nasty and carboned up like hell, doesent even idle with the choke on it

when i do get to ride it it sounds like its almost backfireing and like its bogging down but it feels like it should be putting out more power than it should dont get me wrong when i get up to the 4th or 5th gear it runs perfectly when i keep on the gas, its fun to ride but id like it to be able to atleast idle cause it sucks when i have to stop and keep reving it

any replys/advice would be greatly appreciated thank you

Link to comment
Share on other sites

thank you for all the replys lol, i was afraid of it being that, oh well it will give me something to do this week. i just cant let this classic go down the drain like this plus it was only a 200 dollar investment so far...keyword being so far

we will see what happens in the next few days lol

and thank you for welcoming me oxidized

Link to comment
Share on other sites

yeah i figured id still come out on top of it whatever i put into it, i dont think rings are that much and i might a well rebuild the carb while im at it, my jets on it are clogged and the rings are very badly worn on it my dad started without me this morning xD

http://www.ebay.com/itm/Suzuki-Quadsport-230-230S-Top-End-Gasket-Kit-Engine-Motor-Gaskets-Set-/350507163139

thats what id be needed right? or should i go straight for a wisco rebuild kit that comes with a piston which i think i might do anyways, the piston on it is not very bad id say its still pretty good for being that old its not scared to all hell either like some of the ones ive worked on

Edited by riotpolice
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Ajmboy
      Anyone purchase or check out Rockymtnatv lately? Well I was just browsing over there and they have a pretty cool section called Ten Dollars Or Less. Some interesting things to check out if you are in the market.


    • By mga
      I see quite a few ads for that  Tribotex additive. It's kind of expensive, has anyone used it it their ATV or any other vehicle?
×
×
  • Create New...