Quantcast
Jump to content

Recommended Posts

Posted

I have scored a 1999 bayou 300 for free. It has been setting for years (2) but it was too good to pass up. I have found the usual problems, dirty tank ,clogged pitcock, gummed up carb. etc. I also noticed a oil leak. I lifted the front of the quad up high so I could get a good look at what is going on. I wiped down the case and found something im not sure about. I found a hole in the case at the front and down low. It does not look like it was hit or damaged from riding. The hole is about the width of a penny and about half an inch long, it is located where the case halfs are put together. I thought it could be a vent of some kind but to me it seems to be to low. It would get full of mud and water. I haven't put any money into the quad yet so now is the time to answer this question. Thanks for any help.

Posted (edited)

Thanks ,I looked through the tech manual and found the "hole" is used for case splitting. I found it in section 7-5 on page 91. So the question now is where to get a new plug for it. Thanks for the tech manual my friend!

Edited by kdxfan

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
×
×
  • Create New...