Quantcast
Jump to content

Recommended Posts

Posted (edited)

Howdy, Im not quite sure how to explain this. At the end of the muffler, inside, I guess it is the Spark Arrestor. Well it is completely loose and the screen is off and loose. But Im not sure how to get it out and how to put a new one in there. Im sure it is the original muffler but it seems in decent shape.

Does anyone have any suggestions? Also, whithout spending alot of money, are there any suggestions on what spark arrestor to purchase like a Universal one that just mounts to the end of the muffler with hose clamps or screws?

Thanks,

Edited by tgrider
Posted

Thanks for the Reply Ajmboy. Actually I emailed Rocky Mountian ATV and they said that I need Part # 6 which is called the Pipe, Outlet. It is the Spark Arrestor. It is $77.77 OEM Parts and OEM Motorcycle Parts for Dirt Bikes, ATVs and UTVs | Rocky Mountain ATV/MC

I was able to get the old Spark Arrestor out. I then cleaned up the parts and hosed clamped it back together. I then put it back in. At least it will get me by until I can afford to spend the money.

Thanks again for the Reply

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By Maxg_57
      Is anyone still active on this club
    • By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
×
×
  • Create New...