Quantcast
Jump to content

gyminis

Members
  • Posts

    48
  • Joined

  • Last visited

Everything posted by gyminis

  1. gyminis

    gyminis

  2. i have a 2009 grizzly 700,replaced the fuel pump and filter,replaced the spark plug and checked the air filter for a mouse house! it runs then shuts down,wont stay running,does the fuel line need to be primed and air free to run properly or am i missing something obvious??????????????
  3. i have a 2009 yahama yfm7fgpy speciai edition and the fuel pump is replaced, but it runs till the fuel runs out? could it be a an injector issue or something else:aargh:
  4. HELP, i have a 2009 yamaha grizzly 700 yfm7fgpy special edition with a defective fuel pump and am wanting to know how to test it to know if it is defective or not
  5. Ok, this should an easy one for everyone! I do not have a repair manual,so here i go:-) i need to know where the thermal relay switch for the cooling fan is located???? i have replaced the fan/temp switch/thermastat and all the fuses are ok
  6. hi yall,its been awhile since i came to the site!!! i have a 2009 yamaha grizzly 700 w a cooling gremlin!! And i need expert advice,i replaced the temp switch,thermastate and fan,the fuse is ok but the fan wont come on when needed everything werks ok at a moderate speed,but when on a difficult trail the temp lite comes on w/o the fan werkin im guessing its in the wiring harness as it was wrecked at 1 time,any help would help:aargh: jim
  7. i recieved a 1997 polaris big boss 400 6x6 and need to know what the compression #s should be on a new motor
  8. you guys rock in every way x 100000000000000000000000000000 keep on keepin on
  9. I have a 2009 yahama grizzly 700 and the radiator is overheating,the fan is ok.could it be the temp sender? if so where is it located and whats the avg cost to replace it???
  10. hi yall I lookin for anyone who knows when they are going to have a rock crawlin event at chock cherry canyon in Farmington new mexico,i keep hearing something around july? jim:biggrin:
  11. axle trade,what are the options. I want to lengthen all 4 axles on a 1996 suzuki 4x4 king quad. my question is are all or most models of axles interchangeable?????????????? if not ill accept any information on the same:wink:
  12. I have a 1996 suzuki king quad lt-f4wdx 280cc and am considering haveing it rebuilt as a seal is bad and cannot be replaced w/o tearing the motor apart! I need to know the average price range to do this!
  13. I have to replace a seal on the rear axle!!!!!!!!!!! The seal is where the propeller shaft attachesto the rear axle!!!!!!!! Via a slip joint connnection with a boot.... So to keep a long story short, is there any chance at all the seal can be replaced w/o dissambling the motor!!!!!!!!!!!!!!!!!!!!!!!!
  14. I have a 1996 king quad lt-f4wdx and have oil leaking from the rear axle assy at the seal behind the shaft from the front axle to the rear axle! can this seal be replaced w/o doing major surgery,taking the rear assy completly apart. thanx jim:aargh:
  15. I just bought this carb(brand new) and i recd no documentation with it,not even a packing list from zoomzoomparts.com ???????? Extremly poor customer service. Sent them an email about this,but to be honest Ill never hear from them!!!!!!!!!!!!!!! So the model # is pd36j-a and the item # is 201205733595 from zoom zoom parts! So i am looking for any /all information,specs,pics,diagrams,on this carburetor that anyone can find for me!!!!!!!!!!!
  16. Thanx for ur help,problem solved :-) I need to pick ur brain again if you dont mind? I am workin on another project ( same model,etc) and am having ALOT OF TROUBLE finding a carb for this beast? its supposed to be a mikuni bst31ss 44mil carb and i have searched all over the internet and i cannot even find a used carb to rebuild. so here is 2 questions, can you find a link or someone that may have this scarce animal? If not what would you recomend as an equivillant or replacement to make this animal come alive????????????? thanx again jim :-) here is a pic of the last 1!
  17. Im in need of a rebuildable mikuni bst31ss carburetor to go on a suzuki 1996 250 king quad,i will consider paying for the shipping. lets talk soon!!
  18. i was told it was a 96?so the manual i have is the wrong 1,correct?
  19. i have manual #m483-2,did you find anything in reference to the wires from the stator?
  20. that letter looks like a "T"
  21. tim: sorry , but i may have mislead the whole time? the frame # is jsaa or j5aak42a312103699! curious to know what i really have here, thanx jim
  22. i only have the clymer manual,its not very clear?
  23. the stator wire colors are as follows, 3 yellow wires,1 green wire and a black w green stripe wire!
×
×
  • Create New...