Search the Community
Showing results for tags 'wont run'.
-
I have recently rebuilt my Yamaha warrior 350 engine and when I got it all back together with no “spare parts” i went to start it and realized it’s in reverse. I went to put it in drive and the shifter won’t budge, I took the linkage off and tried to use vise grips but it won’t budge at all. Any help would be greatly appreciated. I’m hoping it’s not something internal!
- 1 reply
-
- yamaha
- warrior reverse
-
(and 2 more)
Tagged with:
-
I traded my dirt bike for a 2000 arctic cat 500 semi automatic. when i went to go pick it up the guy said it didn't get spark, so i thought it was going to be something simple like a coil. well it wasn't. first thing i did was take all the plastics off to get easy asses to every thing. so i bought a brand new battery for it seeing if it got power, it didn't. the dash wouldn't light up neither would the lights, so then i tried to see if the starter worked it didn't so i jumped the solenoid and the starter started turning over the motor. so i bought a new starter solenoid, when i installed it the electric start still wouldn't work , so i bought a new kill switch and starter switch that goes on the handle bars, when i installed it, the electric start still wouldn't work. so then i went to see if i could get spark by pull starting it, i didn't get any spark, so i bought a new spark plug, and guess what, still no spark, so then i bought a new coil for it to see if that would fix it. so i installed the new coil and guess what no spark still and still no power to the dash. so to sum it up i'm not getting any power any where to the four wheeler. so i cleaned all the leads and plugs and still nothing. so then yesterday i took the wiring apart to see if their was any frayed wires, and no their wasn't. does any one have any ideas what this could be i'm up for anything. also if any one knows how to bypass all the wiring just to get it to start i open to that to, or if someone knows where i can get a wiring diagram.
-
We have a 2wd Bear Tracker that was flooded out by a tornado and I've since been trying to get it right. I've cleared the water out of the tank and now has fresh fuel, and I've opened the carb so many times I could do it blind folded under 10min. She'll fire up as soon as you turn the key and hit the button, even on a cold start, and idles perfectly. But the second you hit the gas it bogs down and dies. I had it running GREAT for about 10-15min once and suddenly ran like sh** and limped it back to the house. I've barely got it to move under its own power since. I'm at a loss at this point. Does ANYONE know of something stupid I could've missed? The carb does have a fresh rebuilt kit that I put on about a month before the flood. It was not started until it dried, I cleared the tank and opened the carb the first time. I guess I'm just gonna pull the entire thing apart again and go from there. Maybe another rebuild kit? I'm gonna swear this thing is clean though. Thanks for any ideas