Quantcast
Jump to content

Custom Profile Designs


Recommended Posts

You can spice up your profiles like some of the members out there. If you need help, just ask. Here are some example profiles:

http://www.quadcrazy.com/Roostin

http://www.quadcrazy.com/fletcherboi02

Now profiles can be made like they are made on Myspace, simply by adding code to you profile sections. There are MySpace resources out there that you can use on QuadCRAZY.

http://www.pimpmyspace.org/

http://www.mygen.co.uk/

http://www.coolmyspace.com/

Link to comment
Share on other sites

  • 1 month later...

Hi, on my profile I have a picture in the background that I would like to show through. I have been to the settings and customization page and put the main background and other one to transparent, but the main back ground is black now with some lines through it...lol Am I doin something wrong or this there another way to do this....Thanks, Chris

Link to comment
Share on other sites

  • 10 months later...
  • 11 months later...

Ok now I'm having trouble getting the "Main Menu Headers" Transparent. When I do that it turns red, not Transparent to see my background. I remember doing that way before but now it isnt working.

Do you think some Moderator please kind enough to change it since it isnt working for me?

Link to comment
Share on other sites

  • 3 months later...
  • Admin locked this topic
Guest
This topic is now closed to further replies.
  • Similar Forum Topics

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • By luckyyyyesther
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad(a newbie on ATV). I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!



    • By Sofaspud
      My 2008 can-am Outlander 800r is having hard shifting issues. Does anyone have a fix for this ?
    • By Am2007
      Hi everyone,
      Outlander 2006 400 XT i have replace the startor cover and right after i did that the oil light is on and not turn off, i check the wires and checked the oil level, everything seem to be normal quad is starting without any problem and rev just fine. i did not want to ride it since im not sure if it is faulty sensor or not so just be safe i did not let it run more the a minute or so. 
      I have read in the owner manual that i need to clean the oil strainer every 200hr unfortunately i never did that, my service manual that i have does not even indicate of such a thing. so i did some search around and it seem like canam split the manual into 3 parts
      owner manual
      service manual
      engine manual
      I have the first 2 but i can not find the last one, part number 219100232. If someone can guide me where do i find the oil strainer so i can clean it i will appreciate it.   im going to do an oil pressure test tomorrow to check how many PSI i have, just to make sure.
      Thanks
×
×
  • Create New...