Quantcast
Jump to content

Recommended Posts

Posted

My battery on my Kingquad was low, but not dead, so I hooked it up to my 2A charger. The problem is that I left the key turned on. After a couple of hours, I came back to check on it. I disconnected the charger, and tried to start the quad. Nothing happened. The display did not come on, nor did any indicator lights. After a few seconds, the display came on, but it had a "chec" message displayed near the odometer spot. And something was clicking under the seat. It is what ever the electrical component is right next to the fuse box. When I depressed the brake, to start, the display went black again.

I check all the fuse, and they looked good. Also, the battery is fully charged. I think maybe I burned up the voltage regulator. Is there a way to display a diagnostic code? Any other ideas?

Posted

Not familiar with the quad but check to see if you have any fusible links of any kind, dirty grounds etc. start with the easiest. you might also have a burnt up battery. A battery might show 12v but wont have the amperage to start/power up the quad. If you have a known good battery try that or another atv you can check that battery with, that will help eliminate changing parts and wasting $$.

Posted
Not familiar with the quad but check to see if you have any fusible links of any kind, dirty grounds etc. start with the easiest. you might also have a burnt up battery. A battery might show 12v but wont have the amperage to start/power up the quad. If you have a known good battery try that or another atv you can check that battery with, that will help eliminate changing parts and wasting $$.

Thanks for the advice. It was a burnt battery. Apparently there was enough of a charge to look like 12 v, but as soon as I depressed the brake to start the quad, the rear light dragged it down to dead. New battery, and everything is good.

Posted

Yeah, its a 2008. It was a relay of some sort clicking. What made it weird is that I had accidentally left it on the charger with the ignition on. When I discovered my error a few hours later, it seemed like the battery should be happy, and something else causing the problem. A new battery is easy to replace, so I consider myself lucky.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By rjsummer
      Just some friendly advice on new tires. Check with your ATV dealer. 
      There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!
×
×
  • Create New...