250 Timberwolf 2wd Rear Brake issue

[Guest dukefan]

I recently replaced the rear shoes on the rear brakes, and it seems that I can't get them adjusted. It's just like when they went out, adjust them to the max. I put in the new springs etc but have to crank the adjusters on the rear axel all the way in and it's still not enough. Is there something I am missing? Any help would be great!

Thanks

[GEARHEAD01]

i would check what your max measurements on your drum. it sounds like your drum is worn out and you cant get enough adjustment.

Your Friendly Neighbourhood Mechanic

[DirtDemon]

That is exactly what I was thinking. Another possibility is that the brake cam is worn out, and the shoes aren't getting pushed out enough. Could be that both are a little worn. I would check both. BTW, what year is your Timberwolf?

[GEARHEAD01]

good call DD. I never thought that or seen a brake cam wear. good info for myself seeings how i have to do the rear brakes on my machine as well.

[DirtDemon]

I think it is more likely that the drum is just worn out, because the brake cam is going to be made of harder metal than the parts it pushes. However, I mention it because it could wear eventually, afterall, it is still a part that is exposed to alot of friction, and you can't rule anything out until you check it.