Ride Red Forum

The BRP single cylinder 650 is a unique engine that does not have traditional valve adjustment. It does not use shims either & I believe the rocker arms have an automatic system similar to hydraulic lifters built in. The confusion is that the Outlander 650 is a V-twin with adjustable valve clearances - totally different engine.

After going through the entire service manual with the same issue and no solution. Manual stops at "service ADVISOR". So, will probably need to get a jar of Vaseline and go to the John Deere dealer.

Thanks for sharing. That's good info for anyone looking for a match for their timberwolf.

Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds. It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is.

Thank you everyone for sharing, some pretty cool stories on how people got into quads. I'll reference when I first posted in this topic, back in May 2008! Its crazy how long this community has been online.

Welcome everyone!

Brilliant, cheers, there is a good spark so it sounds like I have either a broken/poor live or a dodgy earth so hunting for that will be tomorrow's task 👍

The fan gets switched on when the oil temperature gets high. The fuel pump gets turned on when you first turn the key but then switches off unless it's getting a pulse from the cdi. The pulse from the cdi is the same pulse that fires the ignition coil, so if you have spark, you have the required pulse to operate the fuel pump relay, you just need to ensure it's getting to the pump control relay. When wires have no continuity, or have high resistance, it's almost right at the end of the wire where it crimps into the metal terminal, it either corrodes or breaks the wires inside the insulation. Wires do sometimes break if they have been chafing for a long time on something and worn right through the electrical tape, insulation, and then the copper wire, but that's easy to spot by the frayed insulation.

On the contrary, you and everyone who have replied have been very helpful, I really appreciate it. That's really good advice, thank you. I will pay particular attention to the earthing and post any findings.👍

Thanks for sharing, looks like a fun time. Im getting a little old for that kind of riding but like watching it. 👍