Quantcast
Jump to content

Recommended Posts

Posted

I have a 450 Wolverine with 500 miles on it. My question is are these known to not have a lot of pick up? It just doesn't seem like its fast out of the hole or top end. It has plenty of low end torque. I thought maybe the CVT belt might be worn....but it only has 500 miles on it. 

Posted
1 hour ago, Finsdad said:

I have a 450 Wolverine with 500 miles on it. My question is are these known to not have a lot of pick up? It just doesn't seem like its fast out of the hole or top end. It has plenty of low end torque. I thought maybe the CVT belt might be worn....but it only has 500 miles on it. 

Those always seems to me like a utility quad dressed in sport quad plastics. It's not going to be a rocket ship, but should be able to get up there in speed as most utility 400 and 450 quads I used to own a Yamaha Kodiak 450 and it was fine and had good low end but wasn't a speedster of the starting line. Now if it's slipping, that's another thing. Do you have it in 4WD or 2WD, if I recall there is a selector.

  • Like 1
Posted

Measure the  belt width and compare  it to  a  new belt to  know  how  much wear  is on it .. 500 miles  of  hard  pull  will wear it  more  than  easy riding. The weight  it is  carrying  also  affects   its acceleration  and top  speed.  My  260  pound  butt on a  buddies  quad  with the  CVT transmission definitely  is  slower  than  it is  with his  150   pounds.

  • Like 1
Posted

I didn’t have it in 4wd. I’m just wondering if it’s me or something wrong? It runs great just think it would have more pick up. I’m not comparing it to my 700 king quad but they are night and day different. It doesn’t seem like it wants to spool up quick.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By sandman001
      Just picked up a 2006 Dvx400. There is a switch I can't figure out what it is or where it goes. Has 3 wires (light blue, black and Yellow)

    • By jordan_ATV
      I got a 2005 350 Raptor Special Edition and I'm dealing with a no start issue; the weirdest thing is when I'm cranking it fires and slows down showing signs of pre firing, smoke shoots out the carburetor every time it sparks. every electrical part (CDI, Rectifier, Stator, Coil) has been swapped out from previous owner, the top end of the engines all new and I cleaned the carb out, anyone got any ideas or similar problems, also is it possible to have a bad spark timing
    • By fixitforfree
      I have a 94 Trail Boss 250 2wd that will not go into forward. Reverse works great but forward just clicks but won’t engage. I’ve verified the shift lever is pushing far enough so I believe I have either an engagement “dog” or mating forward gear that are likely bad. I also see a fair amount of metal on the dipstick magnet. But if I ride the machine in reverse the gearbox seems quiet with no other issues by what I hear. That said I’m in process of pulling the gearbox to see what parts I need. The gearbox has 1341124 as the model number as shown in the photo below but I can’t find any gearbox on eBay or the Polaris parts site that matches that number. Is this 94 model a year that used some special gearbox? My tag on the box even looks different than all the tags on gearboxes I see for sale on eBay. I really want to buy new parts for the ones damaged in my gearbox to fix the one I have but just doing research at this point to see what gearbox I have to know which parts I need. Anyone with experience with this I welcome some advice or direction from what you have learned. Just FYI this machine is new to me but cranks, runs and idles perfect. It’s not beat up and will be a gem when I get this tranny fixed. Thanks.

×
×
  • Create New...