Quantcast
Jump to content


Carb Replacement (90cc Arctic Cat DVX/Kymco)


Recommended Posts

Morning All,  Wondering if anyone has had any success using aftermarket carburetors on the smaller ATVs?  Picked up a couple Arctic Cat DVX90s over the weekend (2006 & 2008), and one of them has an aftermarket carb that needs to be replaced (it's missing the brass barb for the fuel line ).  Both are the same Kymco power plant, but different frame/body.

I swapped carburetors between the machines to test opreation.  Both ran great, and seem to manage the electronic choke properly. 

Am I better off to buy the replacement carb from AC ($250), or try an aftermarket?  Part of me wants a manual choke.....

Thanks in advance for any thoughts.

Link to comment
Share on other sites

Aftermarket carbs are a much repeated topic here at Quadcrazy and will be a talked about topic forever! Many times here we’ve spoke about them and the general census is that they are not very good.  One of our memebers @JacobSlabach has mentioned that they needed to be adjusted way out from the spec position and has gotten them to work.   But the way I see it, if the quad is worth it then put an oem carb on. I always check eBay for a used oem.   

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By Gwbarm
      I Ran across this video today comparing an aftermarket to OEM Carb on Suzuki Vinson, thought it might generate some interest, it is quite long but informative.
       
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
×
×
  • Create New...