Quantcast
Jump to content


2007 Polaris Phoenix dies and refuses to start

FlyingJBIRD

By FlyingJBIRD
in Polaris ATV Forum

 Share

Recommended Posts

FlyingJBIRD Apprentice

FlyingJBIRD

Posted
Posted

I've bought a used 2007 Polaris Phoenix 200... it's in pretty good shape... but after it starts, warms up, a few minutes of my son riding around yard it will die... it refuses to start back until the next day, then same thing again... I've seen this is a problem but haven't found any real answers... my son is driving me crazy to get him back riding... any help is greatly appreciated...

Link to comment
Share on other sites
Frank Angerano Grand Master

Frank Angerano

Posted
Posted (edited)

 

That’s a great bike the Phoenix.  Take a look inside the thumb throttle cover there’s two wires inside the cover with a plastics partition that separates the wires. Mine was worn out and causing a contact issue.  I separated the wires and the problem stopped.  It’s a rev limiter that interferes with the ignition system.  

This could be your problem.  

Edited by Frank Angerano
  • Like 1
Link to comment
Share on other sites
FlyingJBIRD Apprentice

FlyingJBIRD

Posted
  • Author
Posted

Put on a new carburetor new gas lines new gas filter new air filter... started first bump... let it warm up over 5 mins... took it around the yard and it rand great... came back out 10 mins later started right back up took another pass around the yard and it dies again... refuses to start back up... could it be the coil or cdi box... anyway to test?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Werewolf
      2010 Polaris 500 HO oil getting in the air box
      By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • Brantley11
      2000 Yamaha Grizzly 600 No start but with good spark
      By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
    • Spritee1
      2006 polaris sportsman 500 ho issues with the unit like the belt is slipping
      By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • BuckBilly
      The Official Good morning thread!
      By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • Johnfj44
      2010 Polaris RZR Replacement Seat
      By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...