Quantcast
Jump to content

Hey hey

Frank Angerano
 Share

Recommended Posts

Frank Angerano Grand Master

Frank Angerano

Posted
Posted

What's up everyone? Hope all are well, I've missed a lot i see..... Anyway i threw the towel in today and took tomorrow off so i could go play today.  Yes one of the hottest days but screw it, so i wound up throwing the bikes on the trailer and shot up to Lost Trails in PA with my oldest boy.    Great day, we actually sank the bikes today as the mud pits were insanely deep. We had to stand on one foot peg going through the deep sh** to get the tires to grip.  
All the videos you all see watching riders move from one side of the bike or the other or leaning forward or backwards in a mud pit or creek????? It works!!!!!!!! Bikes were fine tg but we pushed the limits with them   

We really mudded the sh** out of that place and went as hard as we could and it was a blast. It was a good day trip and worth the drive. A lot of people were out there riding, i was shocked.  I would have posted pics but i threw the phones in the truck and took off.  I was happy to be away from the phones with work and gone for the day. Definitely need to do this again maybe an overnight trip but to a new spot.  My oldest scares the sh** out of me watching him ride! 😲😲😲😲😲😲😲😲 so I'm looking for a more flat place to ride since he has no fear.   
 

Ok well i will be a little spotty with activity but will definitely be on the forum.  
Good to be back.  

Frank Angerano Grand Master

Frank Angerano

Posted
  • Author
Posted

Its a cool place to ride but honestly aside from the new mud pits and trails they made i would probably do one or two more trips there before it gets old.   Next place I'm heading out to will be mines and meadows i think.  My oldest boy is bugging me to go there.  

Ajmboy Grand Master

Ajmboy

Posted
Posted
5 hours ago, Frank Angerano said:

Its a cool place to ride but honestly aside from the new mud pits and trails they made i would probably do one or two more trips there before it gets old.   Next place I'm heading out to will be mines and meadows i think.  My oldest boy is bugging me to go there.  

Where is that?

Frank Angerano Grand Master

Frank Angerano

Posted
  • Author
Posted

They definitely do have a lot more places to ride.  
I am planning on staying there, question  is 1 day or 2 and cabin or tent?? My son os going to say the typical 16 year old "lets camp" thing but I'm more of a shower after a day of playing in the dirt so we will see.
They also have RV sites so i guess we will discuss over the next week or so and make a decision! 

mikeexplorer Mentor

mikeexplorer

Posted
Posted

I modified it before even using it. The pump that comes with it uses 4 D batteries, but to turn it off and on is the stupid little red button on the box. Plus the base of the pump won't fit in the jug. So I bought a sprayer pump with the lowest flow rate (1.2 gal/min) and turned down the pressure sensor to a low pressure, then added a ball valve inline to the shower head so when you turn off the water, the pump shuts off. Power for the pump comes from the battery mounted on the Jumping Jack using the 2 pin trailer wires.

The tent was designed for a shower bag only so I zip tied a clip to the shower head and just hang it from the hook.

 

Mike

 

0704201347 (Medium).jpg

0713201904 (Medium).jpg

0713201904a (Medium).jpg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • WeeBee
      Advice on ATV Trailer Brand?
      By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • kellogs
      minivan vs. trailer
      By kellogs
      Hello,

      Pondering on what would be better in terms of practicality vs. money spent. The ATV will be a small 125 cc Chinese brand that can be fully contained in a small euro-van (VW Caddy)

      1. Load the ATV on a trailer while riding it.
      Need to buy the ATV + hook + trailer (+ ramp?) and work on the car to mount the tow hook, of course.
      Perhaps I can find a trailer than can do this -
        Side question: what sort of mechanism that allows such loading is that, or, in other words, what sort of trailer am I looking for ?

      2. Load the ATV inside the mini-van.
      Need to buy the ATV + ramp.
      Also need to push it inside as riding it won't be possible. The thing will weight some 100 kilos, about 1.5 times my body weight. I shall go for the longest ramps that will fit into the van, but still, not sure I can push it in and pull it out of the van without cursing my life - if at all doable.

      What do you guys think ?
    • HHurks
      Hello everyone
      By HHurks
      Hi to all
      Newbie here. Not new to ATVs. Look forward to learning a few new things and hope to maybe help some too.
    • Louznmemind
      2007 Yamaha Grizzly 350 carb mixture screw
      By Louznmemind
      (Question is at the end if you want to skip my blabbering) I got this unbelievably well taken care of Grizzly 350 in for a carb clean, it belongs to an elderly couple that bought it brand new in '07. Apparently whoever has been doing their oil changes for them never checked the air filter..
      Obviously it got debris in the carb, it would still run but only idle with slight choke. I've taken it apart and cleaned it, have new o rings, gaskets, etc. As far as the mixture screw is concerned, I'm assuming I obviously need to remove the plug. I'm mainly a lawn equipment guy, I've worked on slide carbs in the past but never an unmolested one with the plug still intact. I hate to mess with it as the carb had very little debris but I'm sure the o ring needs to be replaced at minimum. Finally, the question: what's the best way of removing the plug? I DO NOT want to mess up this carb..



    • Frank Angerano
      My first trailer project.
      By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...