Quantcast
Jump to content

Recommended Posts

Posted

Voted 6 in and 5 out RD is 2 in and 1 out. We are kickin as* already.

Can someone post the link again. Not the banner icon but the actual link. I have to got to the first post of this thread everytime i want to vote. Thanks

Sent from my SGH-T989 using Xparent Blue Tapatalk 2

Posted
Voted 6 in and 5 out RD is 2 in and 1 out. We are kickin as* already.

Can someone post the link again. Not the banner icon but the actual link. I have to got to the first post of this thread everytime i want to vote. Thanks

Sent from my SGH-T989 using Xparent Blue Tapatalk 2

Top 100 ORV Sites - Home

if you click the banner, it will take you there also .... anyway, voted again from diff ip addy

top100_2.jpg

Posted
Thanks! Voted! For some reason using Tapatalk it wont let me click on the banners just the link

Sent from my SGH-T989 using Xparent Blue Tapatalk 2

i like to post the banner when i reply, makes it easier for the next guy getting to the site. i'll keep both links on my reply from now on, just for you mario !! :cute:

Guest
This topic is now closed to further replies.

  • Similar Forum Topics

    • By tflack500tbx
      Background,
      This winter (Dec.) I was plowing and everything just died, just quit.  No lights, no pull start, No nothing.  I've had this problem before and I changed the voltage reg and it ran fine for over a year. Then this.  So I changed it again, thinking this was the same problem.  Tried to start it and a small pin hole in the CDI appeared with electrical smoke.  
      Months go by and I finally decide to just replace parts (I'm Horrible at electrical issues).  I changed the stator, new CDI, new Voltage reg, new starter solenoid, tested the starter (prefect), charged the battery.  
      Went to start it and the solenoid rapidly clicked.  All the dash lights on, headlights work.  Pull stared it and it fired right up no issues.  Looked into the rapidly clicking starter solenoid and it was not enough juice in the battery.  Took the battery completely out and hooked up a jump box to it turned the key, light on, everything looks good.  Pushed the starter button and it fired right up ran great.  Turned it off to test it again, Turned the key and nothing.  No dash lights nothing.  Took the jump box off and pulled started it.  Started it right up.  Re-hooked the jump box, still nothing.
      Any Ideas? 
    • By MadAdy73
      Hi there, can anybody share or link a PDF for the 1999 4x2 Quadrunner LT-F250 thanks. 
    • By flyinbrian365
      The files it too large to upload so here's a link to my dropbox.
       
       
       
      Hope this helps someone!!
       
    • By lindzjo
      Does anyone have a service manual for Qlink 700 atv.I cant find anything on one.Please help
    • By QuadDad22
      Picked up a 86’ LT 185 for $10 in trade value(my items only cost me $10) 
      recoil only , I pull the recoil and it won’t move , so I took it off , I can spin the crank there one full turn left then it locks up , and one full turn back to the right and it locks up
      pulled the plug , the piston is moving up n down , both valves are moving(pulled the caps) 
      pulled the clutch off , oil pump gear , and it still locks up after one turn 
       
      any ideas or where to go from here would be greatly appreciated 
      im a 2 stroke guy so this all is new to me 
       
      thank you in advance y’all 
×
×
  • Create New...