Quantcast
Jump to content

Recommended Posts

Posted

Hi there, I just bought a 1989 yamaha breeze 125 for my daughter, and I seem to be blowing plugs after every ride....wondering if anyone knows the correct spark plug i should be using or if anyone has had the same problem?? I dont have the manual,but wondering if the guy i bought it from was using the wrong plug...once i put in a new plug it runs fine for that time then next day need to change the plug again.......thanks carrie

Posted

Caught you again Bot, you double poster you.

Carrie, your Breeze could be fouling plugs for many reasons. Fist thing, obviously, make sure you are using the right plug. If the plug is right, tell us what your bad plugs look like, take a good picture if possible that will help alot.

Posted

Hey there, ok I took some pics of the plug, but I cant seem to upload them...I think my file size is to big...and i have no idea how to decrease the size...if you would like I could email them to you if that helps....but I will describe what it looks like.... When I remove the plug it is very black, not overly wet, but appears to be full of carbon! The plug Im using is an NGK CR7HSA. Thanks.

Posted

Sounds to me like she's running too rich. You might have a fuel mixture screw on the carb that you can adjust. I doubt it was jetted.... Is it all original? Are you getting smoke out of the tailpipe when you are running? If so, is it black?

Posted

I agree, that you are probably running rich, or you are getting some oil in the combustion area. Follow ATV mechcanics' suggestion on the fuel screw, it is probably on the left side of the carb or on the bottom, just to the front of the float bowl. Is your air filter clean? A compression test can tell you alot as well. You should be able to clean those plugs with some fine sandpaper and re-use them. Like Stoopidbot said, an image hosting site makes posting pics easy, I use photobucket myself.

Posted

Hey there, thanks for the info....yes it is all original! No have not noticed any smoke from the tailpipe...my daughter has only driven it a few times.....will check the fuel mixture screw and get back to you.....THanks.

Posted

Good luck, remember to check that air filter, a dirty filter could very well be your problem. I would do that before messing with the carb adjustments. I should have been more clear about that when I posted earlier, sorry.

  • 3 weeks later...
Posted
Hey there, thanks for the info....yes it is all original! No have not noticed any smoke from the tailpipe...my daughter has only driven it a few times.....will check the fuel mixture screw and get back to you.....THanks.

Carrie, how did you make out with this? Any update?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By Maxg_57
      Is anyone still active on this club
×
×
  • Create New...