Quantcast
Jump to content


newb


Recommended Posts

Welcome, that is a nice ride you got there. I am curious where you got an '05 250R since the last year they were produced was 1989. Is it a fresh build using after an aftermarkets frame and other newer parts? Or maybe a 450R or 400EX with a 250R motor and plastics? Can you post some better pics of that thing?

My bad thare dirt demon it is an 87 trx250r that was restored from the ground up will post some better pics of the trx250r

Link to comment
Share on other sites

nice ride and welcome to the site :) i hear a lot of parts are interchangeable between the 250 and 400...

I have +2 Burgard a-arms for a 400EX on my R, you just have to use spacers on the '86 and '87 frames, I believe they are a direct bolt-on for the '88 and '89's. I use the 400EX spindles, hubs and brakes too, but I am working on adapters to put the R brakes on the EX spindles because the R has twin piston calipers and the 400EX brakes just don't cut it with the CR 500 motor.

Eduardo, that is one clean R, that thing is immaculate.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By Gwbarm
      I have been exploring all the options available, so many, its hard to choose. I have kind of narrowed it down to the Honda Pilot, Subaru Outback, and Kind of looking at the Outlander, although its a little small,  the new one is nice looking. Just wondering if anyone has any recommendations or gripes with any of these rides. I have driven Jeeps for the past 25  years and they have been great, but their price point has gotten to high. Expieriences good or bad would be helpful. Thanks!
×
×
  • Create New...