Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I've bought a used 2007 Polaris Phoenix 200... it's in pretty good shape... but after it starts, warms up, a few minutes of my son riding around yard it will die... it refuses to start back until the next day, then same thing again... I've seen this is a problem but haven't found any real answers... my son is driving me crazy to get him back riding... any help is greatly appreciated...
By Thomas Brooks
I know...I feel stupid for asking. I find it impossible to use the thumb throttle with my thumb when I have the bars turned full right. I have to reach across the top and grab the throttle from the front with my fingers. It isn't very smooth and I can't help but think that there must be a technique, mod or adjustment for this. How do I get past this?
2017 Polaris Sportsman 570 X2
By Steven Workman
So I have a Honda Fourtrax 300 year 1988. The ignition doesn’t start it with no sound. The headlights won’t turn on. It has a brand new charged battery, fuses are good, oil is good, gas is good, reverse is rusted, it shifts good, won’t jumpstart but when you try it will turn over, it will start if you jump the solenoid give it gas and spray starter fluid on the breather but it won’t stay on long but will stay on for the little time it does by itself. I don’t know what’s wrong and I need help!
So I bought a 2001 Quad Runner 250 for my son/wife. Sorry I run a Grizzly 660.
I’ve rode it many times with no issue.
My son’s first time out, I could always hear him but feeling he ran it red line in first gear a lot.
So this is what it was doing during/end of the 2-3 hour ride:
- halfway though noticed smoke (oil) coming from front of the motor sort of under exhaust manifold. Once back at the truck, it was really noticeable. Definitely oil burning off. I’m thinking from the top end maybe.
So quick inspection:
- No leaks or seepage of oil that I could see
- I pulled the plug and it’s black but not wet
- No blue/white smoke in exhaust
- seems to still ride fine
- Engine still has plenty of oil
But now that I’m looking at it back at the house - it’s a hard/won’t start when hot. It starts right up cold no problem but once it stalls when hot, have to let it sit for 10-15 before it will start again.
It wasn’t idling before that trip so I jacked up the idle a bit as well but I think that’s a carb clean/adjustment but...
Any input is appreciated.
Thanks for any help.
Sent from my iPhone using Tapatalk
I've had this machine for 2ish years, has ran great up until winter. Sometime during then, I managed to break the exhaust right before the muffler. The summer before it had a hard time idling, but we fixed it by cleaning the carb, and messing with idle. Near the end of last year, the only way for it to fire was the have full choke, and full throttle, and the engine bogged down and you had to keep on throttle for 25mins. Over winter, the throttle had dislocated, and I got it back in place. We got it running, and all was good. Spring came along, and now it doesn't start at all. A fluid is coming out of the exhaust, and I'm told it could be water from over winter. I checked the airbox, and the air filter isn't for this quad, it also is barely sucking air. There appears to be little to no compression, based on this. I'm pretty sure the engine is flooded, as the spark plug produces a spark, but is oxidized. I don't know how the previous owner treated it, or when it's last oil change was. A bolt on the engine has either oil or gas seeping through it,abd was loose. I tightened it and it consisted. The engine is basically positioned in the rear, and it needs a good clean, I don't have a pressure washer, so I can get the built on dirt off. any recommendations on how to get the beast started again?
Similar Tagged Content
Was using the quad the other day to shuttle wood from my pickup to my wood pile. When the job was done I turned off the Quad and heard a bit of a racket from the front end. When I got down underneath the sound seemed to be coming from the fan housing. fan was moving in spurts and not quickly... much like a computer case fan that's had it's day. What I know.
Temp sensor is ok, as the fan tries to activate fan is getting some voltage as it is attempting to spin. When I first bought it used I tested the fan direct to battery and it was fine. The fan was working ok even not direct wired as I went on a couple of rides and when stopped and idling the fan did run Seems to be free spinning with my finger read up in the manual and they require me to drop the rad. now I'm not opposed to that as the rad has some damaged areas I want to try and straighten out. But if I can get the fan working without, I can leave the rad as it is until next year.
Fan assembly is about 300 bills, any work arounds or alternatives? I even thought large computer case brushless fan. smaller ones are about $7 larger ones better quality probably far below the 300. They run standard 12v DC.
Anything I should be doing before dropping the rad... other than check for obstructions even though it seems to spin, and trying to hardwire it to the battery again for a test to see if it acts the same?
By Guest Fox300exchic
The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
Recently Browsing 0 members
No registered users viewing this page.