Quantcast
Jump to content

Recommended Posts

Posted (edited)

hi i have a 06 700 kingquad and i wondering if anyone can help me the bike is missing if you take off to fast and once your up to 80 or so and hit the throttle it will stall the exhaust is also getting red from the head back to the muffler tip i have changed the battery took the tank off and cleans the pump cheaked for broken wires and cant find anything also it runs around 13 volts with no lights on but when there on it will drop all the way down to 8-9 could the be the statior or regulator and has anyone ever had the throttle posion going bad i wonder if that is causing the miss in the injuctor but if anyone has any of these problem i would like to know if there is a easy fix befor i start buying parts thanks

Edited by littlemac
Posted

That quad should be fuel injected. Have you checked your air filter for clogging. At high rev, you need allot of airflow.

* Changed your thread title, included year, make, and issue.

Posted (edited)

I am inclined to agree with Ajmboy, it sounds like you aren't burning enough of the fuel in the combustion cycle, so it burns off in the exhuast making it get hot like that. A clogged air cleaner seems like the most likely thing to me as well. It would explain the stumbling in performance too. Check the air cleaner first, but if that is not the problem, I would check the throttle position sensor next. Also, there may be a sensor inside your air box, it is an air temp. sensor, that could be causing problems too. There is also an air pressure sensor on the throttle body, if that isn't reading properly, it will affect fuel delivery. I assume that the engine temp. light is not coming on, right?

Edited by DirtDemon

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By toe420
      Anyone here from BC? Where do you ride? 
    • By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By captnunu
      I have a 2007 kingquad 450 fuel injection. I try to start it with the hand crank and almost flip over the quad. I have taken the hand crank off and cleaned it but this did not fix the problem. I believe there is a decompression valve that is supposed to engage when pulling it over by hand. How can I check this?
    • By Zrach
      I wanted to share a successful workaround for a "no-spark" issue on a 2009 LT-A400.
      This is specifically for cases where the CDI has been diagnosed as faulty, but the age or condition of the machine makes the cost of a brand-new OEM unit hard to justify.
      Note: This modification compromises the factory “no-start” circuits.
      On some malfunctioning CDI units the internally damaged circuitry is only partial.
      Feeding full time power to the Parking Brake pin, the unit is triggered to bypass the internal fault and produce a healthy consistent output to the Ignition coil.
      The Modification
      See the second diagram attached below for the wiring specifics.
      The Result:
      The machine has clocked over 1,000km since this repair and is still running strong with no ignition dropouts.
      ⚠️ IMPORTANT SAFETY WARNING ⚠️
      Please be aware that this modification compromises the factory safety "no-start" circuits.
      The machine will now start in gear. The safety interlock involving the handbrake is no longer functional. The machine can move unexpectedly if the starter is pressed while in gear. Proceed at your own risk. If you sell the machine or let others ride it, ensure they are fully aware that these factory safety buffers have been removed.
      Faulty CDI Workaround.pdf
×
×
  • Create New...