Quantcast
Jump to content


2000 yamaha warrior not running


reba26

Recommended Posts

Hey I am having the same issue with my warrior. I have a 2003, I know there are some differences in electronics and other minor things, the stators are different, but let me say this, If you are not getting spark to the plug, even by pulling the plug out and touching it against the exhaust near the cylinder. The first thing you replace is the cheapest thing, spark plug, if that doesnt fix it, replace the ignition coil, if that doesnt work its a toss up between the stator and the voltage regulator. I talked to some yamaha guys at Champion Yamaha here in Mesa, AZ, and they said when warriors have electrical problems 9 out of 10 times its the stator. So far on mine I have replaced the spark plug, the ignition coil, the voltage regulator and will be replacing the stator some time soon, I got caught up buying a used carburetor because mine had a frozen pilot screw. Took a hammer to my old carb. so i rebuilt the new/used one i got from craigslist. I haven't touched my cdi yet. Hoping its good, if its not im getting a no-rev limiter. I just bought a stator off of ebay, the guy said it was a 2002 warrior stator, when i got it, the connectors were different so i talked to the guy he told me to send it back, and i'd get a full refund. come to find out its for a 1996-2001 warrior. He said it was pulled from a running quad, I can talk to him again and see if he wants to sell it to you for the same amount i bought it for which was $69 shipped. in my experience you don't want to buy used oem or cheap electronics like RMstator canada crap, sorry Canadians. Ricky Stator ive heard is very good, also the yamaha guys said buy moose racing stators, they are ricky stators but $60-75 cheaper. But I'm gonna take a wild guess and say that your stator is bad. wouldn't hurt to check your other parts like your spark, ignition coil, and voltage regulator. I also have a Haynes book for 1987 through 2003 Yamaha Warrior. Let me know what pages you would like to see, and what specs you need, and I will scan them and email them to you.

Edited by calypsoaz
Link to comment
Share on other sites

Well, I replaced the cdi box and now it doesnt stay running. It blew the spark thing out of the exhaust pipe. I didnt even have the four wheeler for a week and it broke down. I think my boyfriend and I will take it into a yamaha dealer and have them look it over.

Link to comment
Share on other sites

Most likely it is your stator. I got my warrior about 9-10 months ago and i only got to ride it maybe 3-4 hours and the stator stopped working, and the pilot screw being froze it was running lean and overheating. so it would run for about 20-30 minutes then shut down. so im still waiting on testing the nerf bars meant for a yfz450, and my custom built wheelie bar with skateboard wheels. :)

Oh and the dealer will charge you an arm and a leg for something that can be figured out with just process of elimination. Ive heard they charge near $400 just for electronics testing, when you can buy all the electronics for around the same price, with yamaha you will spend $400 for the testing then another 400-600 for OEM parts. Its retarded, you do get to narrow down what part it is thats broke, but why not just replace them all with racing quality parts to begin with?

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Need-help-with-quads
      So I have an 89 Yamaha moto 4 250cc and when I ride it, itll get hot after like 10-15 mins and then will just die and turn off.
      It's has new carb rebuild, new air filter, new battery, new spark plug so I don't think it's a crack in the spark plug
      Can anyone help me?
    • By Werewolf
      Oil is getting in the air box from crankcase vent tube, I put the two hoses that go to the air box together then something started to smoke on the front of the engine. There is a filter? In the line I blew that out.
    • By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
    • By oxidized_black
      Yamaha ATV manuals are located in the downloads section here at QUADCRAZY.
      Please visit the downloads section at https://www.quadcrazy.com/files/
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
      Clymer ATV Manual - Yamaha Raptor 700R
       
    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
×
×
  • Create New...