Quantcast
Jump to content

Recommended Posts

Posted

not the honda !! My 05 450R stock hp is about 34 :laugh:The stock Yfz is around 40ish Not sure about the Kawi!! Since the Kawi and the YFZ are fuel injected that leaves the honda out of the picture! I`ve got a ported head with +1 valves -cam-venom exhaust higher comp piston I`m pushing about 50HP now and still have to give it hell to beat a YFZ with the 3 mods IMO A couple of my buddys have the Kawi 450 I`ll see what theirs does ! Great quads (all 3) you cant go wrong I think the honda `s are a tougher quad for woods but a all out race I take the Yami

  • 2 weeks later...
Posted

After riding the three with the three mods i talked about the kawi actually won i know i was surprised to but after putting a intake on the kawi you gain 5 horse and the yamaha and honda are left behind at around 1- 2 horse it was tight betweeen the yamaha and kawi but the kawi pulled it off and the honda well the honda needs to get up to date with the fuel injection.

Posted
After riding the three with the three mods i talked about the kawi actually won i know i was surprised to but after putting a intake on the kawi you gain 5 horse and the yamaha and honda are left behind at around 1- 2 horse it was tight betweeen the yamaha and kawi but the kawi pulled it off and the honda well the honda needs to get up to date with the fuel injection.

What mods did the honda have done ?? :confused:

Posted
After riding the three with the three mods i talked about the kawi actually won i know i was surprised to but after putting a intake on the kawi you gain 5 horse and the yamaha and honda are left behind at around 1- 2 horse it was tight betweeen the yamaha and kawi but the kawi pulled it off and the honda well the honda needs to get up to date with the fuel injection.

You are the first person I have ever heard say that the Kawi can take the TRX and YFZ. I know what I have done and who I have spanked in a race... the Kawi is nothing impressive in my opinion. Rider plays a bigger roll than the 3 mods will make.

Carb machines are easier to work on and they have better throttle response.

Posted

Ill take the 450r over the rest cause it has good power, its light for jumping, and has that Honda reliability that everyone loves. I personally dont like Fuel Injection either! Great part about the kawi is that it has reverse, and the yfz is fastest in a straight line. I would take the 450r anyday.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Arizona
      I recently bought a 87 TRX 250 not running of course, the owner had a brand new Key Switch on it.
      I think it is the wrong one or wrong wire colors as the colors dont match up with wiring diagram i downloaded for it. 
      anyone have a pic of their ign switch wires where they connect with the wire colors for that model? I ended up leaving the black/w stripe and
      green wire disconnected in order to hot wire it for other testing but would like to know as the colors dont match diagram. 


    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
    • By mans
      Were is the neutral safety switch on 03' Kodiak 400 4x4 . How xan i check it to see if it's good for a no neutral light no power to machine. Ty
    • By Mech
      View File 1987-1990 Yamaha YFM350ER Moto 4 service manual
      YFM350ER Moto 4 service manual. !987,1988,1989,1990.
      Submitter Mech Submitted 02/10/2025 Category Yamaha ATV  
    • By Ejwill
      Well while I was waiting for new parts for the choke, I decided to adjust the clutch. When I removed the lock nut, I found the guy I bought it from or someone else had stripped the threads on the adjustment rod. I couldn’t get the adjustment rod to turn without putting a pair of channel locks on the screw driver, this was telling me something was wrong. So now the rod pushes in and out and spins freely too freely. So guess I’ll have to take the clutch housing off to see what’s going on and replace the adjustment rod, it’s threads are beyond repair, and there is something going on with the adjustment rod. If there’s another way please let me know. The further I go the worse it gets. Thanks for any help.
×
×
  • Create New...