Quantcast
Jump to content

Newbie from Long Island, NY

marioweldinginc

By marioweldinginc
in New Members Area!

 Share

Recommended Posts

marioweldinginc Veteran

marioweldinginc

Posted
Posted

Hi Everyone

I bought my first clutch quad - a 2003 Honda 400ex in May. I have never rode it before because I am on the Land of NO-NOTHING concerning ATVs.

I also have a Yamaha 200 Shaft Moto4 that is in Delaware County at my parents place. The land up there is being developed and most of the trails are gone. I don't ride up there anymore.

I would like to ride out in PA at Reading Anthracite. Anyone go there? If anyone is from LI,

would I be able to hitch a ride (quad too) as I dont have a tow vehicle yet. Im working on it. I would pay my own way and then some.

Thanks

wylde1 Grand Master

wylde1

Posted
Posted

Hi and welcome to QuadCrazy. I am right in the middle of Reading Anthracite's riding area. There is a little bit of every kind of riding in it. I don't ride on their grounds myself anymore, but rode there all the time when I was younger.

marioweldinginc Veteran

marioweldinginc

Posted
  • Author
Posted
Hi and welcome to QuadCrazy. I am right in the middle of Reading Anthracite's riding area. There is a little bit of every kind of riding in it. I don't ride on their grounds myself anymore, but rode there all the time when I was younger.

Ive seen youtube videos from RAC and it looks beautiful over there!

I read alot of forums that complain about the RAC $125 permit price but thats a helluva lot less that the $1000 - 1200 per year pass just to ride on a man made track on LI.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • Cj Winds
      2009 Honda Rancher TRX420FA with shifting problems
      By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • cfherrman
      1988 Yamaha 350 Big bear No spark
      By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • logray
      Looking for Quadrunner Flywheel Starter Clutch Gear race diameter
      By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • Mikey509
      2000 honda recon battery charging
      By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • Mikey509
      2000 honda recon fourtrax 250
      By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...