Quantcast
Jump to content

Recommended Posts

Well, hello to everyone at quad crazy....... I am back w/another question about my 350 raptor. So i changed the entire electrical system w/a good wiring harness and the the quad i got parts from ran not 20 min before i took parts off f it. So i get it back together and try to start it and still no fire. So i took the side case cover off again changed the stator and tried it it started... Yea!!!!!! Well, thats what i thought til i torqued the bolts on side case and tried it again and what??????????? No fire again...... So tell me what it could be cause i am lost and dont know what else to do? So once again Spangie1076 needs anyone or someones help..... All suggestions will be considered cause i have the slighest idea of what to do

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By mattgoodwin
      I'm repairing a 96 Timberwolf 2x4. Many years ago a dog chewed the wires that go from stator to the rectifier/regulator, and I've had to use the pull start ever since. Ive since lost the plug for the stator and on the wiring harness side. I'm ordering a new stator that will also come with the female plug that I need to fix it on the wiring harness side, but I have no clue in what position to put those 3 white wires(ones I'm holding with electrical tape on them) back into the new plug. Since they're all the same color, does it matter? Any info on this or pictures anyone has of their own will be very much appreciated.

    • By Chucksta
      So.. it a weird one.. The quad surges as you go down the road. By the looks of my tracks, it's one wheel only. High range, low range, 2 wd , 4 wd.. It just doesn't matter.. 
      You can see in the pictures the marks it leaves. That was in a straight line, with hardly any acceleration. 
      Any ideas?



    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • By Stang
      As noted above!
      I’ve been looking for quite a while now to replace my rip torn CV boots and CV shaft with the axle set up for all four corners.
      I cannot find a company anywhere that sells aftermarket axles
      Also, looking for a new four-wheel-drive actuator switch that bolts to the front differential mine was broken off by a large branch.
      I cannot find anything but OEM parts what gives??
      Again 2024 Kodiak 700 EPS.
    • Fast Free Shipping on All Orders Over $50
    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 
×
×
  • Create New...