Quantcast
Jump to content

Recommended Posts

Posted

I have a 2007 KinRoad Quad 200cc ATV.

It was running great and then acted like it

Was flooding out and died. I smelled gas

and the air filter was flooded with gas so

I ordered a new carb, bolted it on....

Nothing!!! pulled plug and no spark so..

I ordered I new coil, CDI box, and plug.

After installing, turned key.. Nothing, still

No spark. So I ordered a new 12 coil stator

and just knew this would fix it, still nothing.

I just checked all my wire connections

and found 2 pins in one of my connectors

wasn't fully seated so fixed that, still nothing,

No spark!!! Help!!! I don't have a wiring diagram

For a Chinese ATV so no sure what else to do,

felling really stupid right now!!!!!

I have a fluke muli meter but not the best

at using it and not sure about where to check and

what input/output values should be coming

from from engine (CG200cc)

Posted

Welcome to QUADCRAZY. Did you reach out to them and see if they can send you a wiring diagram? There could be an ignition relay or something or bad ground. I don't think the issue is the carb.

New coil and all and still no spark, could be as simple as a bad ground.

Posted (edited)

Yeah I'm starting to think that it may be

and neutral safety switch or something

Simple because none of this makes sence

To me. I don't have a kill switch like bike because

I have a key switch mounted on fender

and checked it and it's good. Going to start

adding new ground cables to make sure

Frame,engine are grounded good.

Being in the Aerspace field, we have lots

Of that stuff. :D.

Edited by Fordmtrsp
Posted

Oxidized-black, THANKS SO MUCH!! I feel

Alot better about that!!! :)). Going to put the

case cover/stator back on tonight and

get back to trouble shooting this crazy thing.

I'm figuring the only reason I'm not getting

spark is either and bad ground or neutral

safety switch, it has to be something simple.

I'll keep y'all posted on the progress.

Posted

I have no luck with electrical issues. It's like you said could be something simple, but tracking it down takes more patience than I ever have. Good luck and keep us posted.

Posted

I'm not a pro at electrical stuff, just know

enough to be Dangerous..Lol!!!

Thank Gosh I work in the Aerospace industry

and have top notch Avionics Tech to fall back on.

Lol, can into work this morning and had 4 guys

over at my tool box asking me questions about my electrical.

:))). Trying to get as many people involved so that

I can get this crap figured out and be able to go

Sling some MUD!!!! :)))

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By RGS
      1989 Moto 4 YFM350ERW intermittent spark.
      Quad has set for about 7 years and was running when parked.  When I replaced the battery and attempted to start it had no spark. 
       
      What I have done.  Followed troubleshooting in the manual. 
      1.       Coil failed the resistance check so I replaced it.  Still no spark.
      2.       I performed resistance checks on the stator and they all pass.
      3.       Found a bad rear brake stop switch and unplugged it and connected the wires in order to disable.  Now I have intermittent spark.  I believe that the issue is with either the stator or CDI and not sure which.
      1989 seems to be a transition year for electrical.  I can get new aftermarket CDI units for 87-88 and 90-94.  I cannot get ones for a 89.  I can get new stators for 87-89 and 90-95.  Looking at the schematics the wiring on my moto is closer to the 90 ones on the ATV side of the CDI and closer to the 87-88 on the stator side of the CDI.  Looking at part supply sources the stator housing is the same part # for all the years and looking at some of the stators on Amazon that have the dimensions on them both of the stators are the same size.
      What I am thinking of doing is to replace the stator and CDI with a 90-95 one as these parts are all readily available.   Does anyone know if this has been tried before and if there are any issues with doing this.  
       As a side note I also have a 1993 Moto 4 YFM350ER that has been sitting longer but it is located about 400 miles from me at this time.  By doing this change in addition to being able to get parts I will also have 2 ATV’s that are the same electrically. 
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
×
×
  • Create New...