Quantcast
Jump to content

Wheres the apostrophe?

osufans

By osufans
in Website How To & Feedback

 Share

Recommended Posts

osufans Apprentice

osufans

Posted
Posted

Ok, this is driving me nuts. How the heck do I get this forum to accept the apostrophe input from my keystrokes? I can copy/paste one in, so I know its supported. But for some reason when I type it, nothing happens.

quadnut20 Grand Master

quadnut20

Posted
Posted
Ok, this is driving me nuts. How the heck do I get this forum to accept the apostrophe input from my keystrokes? I can copy/paste one in, so I know its supported. But for some reason when I type it, nothing happens.

I`m not sure ! Its seems to be workin on my end !:confused:

osufans Apprentice

osufans

Posted
  • Author
Posted

Interesting...so using the IE Tab extension inside Chrome works fine. So for some reason Chrome doesn't like this forum...lol

I may do some more digging to see why. But otherwise, thanks for the info.

Admin

Admin

Posted
Posted
Interesting...so using the IE Tab extension inside Chrome works fine. So for some reason Chrome doesn't like this forum...lol

I may do some more digging to see why. But otherwise, thanks for the info.

I'd be interested to know myself.

  • 1 month later...
mxquadmom Contributor

mxquadmom

Posted
Posted
Ok, this is driving me nuts. How the heck do I get this forum to accept the apostrophe input from my keystrokes? I can copy/paste one in, so I know its supported. But for some reason when I type it, nothing happens.

Same problem here. I have only used Chrome since opening my account here & the apostrophe does not work for me. Always had to copy & paste from Microsoft Word to get that apostrophe. Also when a member leaves a comment say on one of my videos I am unable to respond back because I am using Chrome. I can click on the submit button but unable to leave a message. Thank goodness found this post & realized to try another Internet Browser. Works fine using IE. Very weird..I can't stand using IE! :nah:

  • Admin locked this topic
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Similar Forum Topics

    • McClaw
      New to the forum
      By McClaw
      Hi Guys, I'm new to this forum.
      I have been riding quads for the last 20 years, however my quads are extremely old and outdated, all three are about 20 years old LOL.
      I have been looking at upgrading, but need your input.
      I've narrowed it down to the Polaris Sportsman XP 1000 S or the Honda FourTrax Foreman 4x4 EPS
      What do you guys think?
       
       
    • TravisCr
      New to the Forum- working a 2003 Polaris Sportsman 700 Twin
      By TravisCr
      I bought this from a buddy to plow snow up in the North Eastern Washington- its been getting oil in the water and I've been changing the oil often and adding collant as necessary-
      I've taken the stator cover off and I'm looking at the Oil Seal and water pump seal and they look good- Although I've ordered a factory oil Seal I'm looking at putting it in this afternoon-
      I don't have the factory service manual- am I suppose to Add RTV to the Stator cover Gasket? I've seen some folks suggest grease other suggest RTV?

      Any suggestions here- I'm trying to reassemble it tonight- I looked at downloading the manual but need to get up to 10 posts firsts it looks like-

      I appreciate any suggestions- normally I'm a jeep and honda dirt bike guy- but  I got a good deal on the quad and a plow so I went for it
      Its got a bit over 3K and runs pretty good- but I've had her tore apart for 3 weeks to figure out the oil in the coolant issue.
    • tds7
      2001 Big Bear 400 Front Differential Pinion Input Shaft replace bearing and seal
      By tds7
      Do any have any experience replacing 2001 Big Bear 400 Front Differential Input Shaft bearing and seal. Getting ready to buy one but the seal and bearing are bad. Any help would be appreciated. 
       
       
    • KdlH
      Hello, I'm new to the forum
      By KdlH
      Hello.
      I'm new to the forum, I live in the UK. I have just bought a 1995 Yamaha Moto 4 350.
      Generally the condition isn't too bad (I paid very little for it!), it looks quite original and all the plastics are quite good. The bad bits are no brakes, the rear axle bearings are shot and the transmission won't shift through the gears properly.
      I'm not planning on a full rebuild but I would like to sort it out a bit. The transmission is my main concern. If anyone has any ideas on what might be the cause I would be grateful. I can explain what's happening in more detail if required.
      Thanks everyone,
      Kester
       



    • hfrost112
      new to forum
      By hfrost112
      new to the forum saying Hello from arizonA

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...