2000 Polaris Scrambler 400 - Anti-Freeze Problem

[Atvspeeddemond]

I have a scrambler 400 and the antifreeze was going through after one ride and then after awhile I smelt the antifreeze burning in the exhaust. So then I changed the gasket on the piston head.it hasn't fixed the problem. Now the spark plug get ruined after 3 times of starting the atv. But there is no coolant in the plug. Any suggestions

[oxidized_black]

is there coolant in the crankcase? could the head be warped? bad water pump seal? what year is this bike, a 1996?

is there a telltale hole at the water pump, and is there some anti freeze dripping? a seal is gone if there is ...

Edited January 1, 2013 by oxidized_black

[Atvspeeddemond]

It's 2000 the head is not warped. I havent been seeing any leeks or drips but I will take a closer look.

[quadnut20]

I have a scrambler 400 and the antifreeze was going through after one ride and then after awhile I smelt the antifreeze burning in the exhaust. So then I changed the gasket on the piston head.it hasn't fixed the problem. Now the spark plug get ruined after 3 times of starting the atv. But there is no coolant in the plug. Any suggestions

U said it ruins ur plug !! What color is it !! Whats the oil look like ? U said u did the head gasket already - did u torque it correctly !!

[CK1999_400ex]

had to work on 1 of thoes that was doing the same thing ...it was the base gasket at the bottom of the jug (cylinder) .. i also replaced the water pump shaft seal and the gaskets on the water pump just to make shure they were new and not causing any problems in the future ... so i would check both of thoes just to make shure .. and they dont cost that much to do.. just the time to do it is about 2 to 3 hours ..

[Earthmover]

Make that 2 or 3 days for me CK

A week even

[Guest kjames]

Curios to know the out come I had a problem with mine blowing pressure back through the cooling system, changed gasket had the head checked, torqued back down to specks same problem took it back apart and a friend in lighten me that this bolts are made to stretch. Replaced them and have had no problems since,well not with that anyways

Sent from my HTC Sensation 4G using Tapatalk 2