Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

1 Screenshot

About This File

This is the service manual for multiple models of polaris atvs from 1999 to 2000

Model Specifications (1999)

Trail Blazer 
Trail Boss 
Xpress 300 
Xplorer 300 
Sportsman 335 
Sport 400 
Scrambler 400 
Xplorer 400 
Scrambler 500 
Magnum 500 
Sportsman 500 
Big Boss 500 6x6
 
Model Specifications (2000)

Trail Blazer 
Xplorer 4x4 
Trail Boss 325 
Magnum 325 (01 Engine) 
Magnum 325 (04/05 Engine) 
Xpedition 325 
Sportsman 335 
Xplorer 400 
Scrambler 400 2x4 
Scrambler 400 4x4 
Xpedition 425 
Magnum 500 
Scrambler 500 
Sportsman 500 
Sportsman 6x6 




User Feedback

You may only provide a review once you have downloaded the file.

There are no reviews to display.

  • Similar Tagged Content

    • By Micah Gafford
      I've had a seriously annoying time trying to deal with the brakes on my rebuild. What size is the fitting that screws into the inverted flair cross and into the caliper? I plan on trying to make parts I need with braided steel hose.
    • By flyinbrian365
      View File 2002 Polaris Magnum 325/500 Service Manual
      2002 Polaris Magnum 325/500 Full Service Manual
      Submitter flyinbrian365 Submitted 05/14/2020 Category Polaris ATV  
    • By flyinbrian365
      2002 Polaris Magnum 325/500 Full Service Manual
    • By Chase Cook
      Hi I just got an Polaris sportsman 500 4x4 ATV the other day. I got it real cheap but I started to go into it because it didn't have compression so I bought a new piston and ring kit for it and installed it, but now when I try to start it all it does is shoot fire out the exhaust or the intake of the carburetor. And a timing is top dead center.;I think I can't really tell another way if it is or not. when I put it together I made sure to piston was on top and the cam lobes where facing down where are the cam sprocket is facing up. It has gas and spark. It did start a couple minutes ago but it didn't stay running and now it won't start. Do you think the valve need to be adjusted more to close better?I'm fixing to try that out and if that don't work what is the problem? Also I made sure everything was together good and right and change the oil and changed out the radiator fluid.
    • By Brian Sosebee

      I just rebuilt my 03 sportsman 400. Put everything back together added oil per the manual. Pinched off the oil tank vent line 2" away ran for 45 seconds then cut it off. Check oil level and it was still way high so I wasn't confident that it primed so I did it again. Checked again and it's the same. Remove the oil filter and it is dry. I did the procedure again and the same results.

      I'm worried to keep trying this as the only oil in the engine is what I used to lubricate the parts when reassembling the piston. The crankcase was drained as well.
      I Removed the oil tank and checked all the lines for obstructions and the screen filter and the vent hose and everything is clear. I even pulled a small vacuum on the oil tank while it was pulled off to make sure there were no leaks. The dipstick cap was on tight so I'm not sure why this thing is not priming.

      Anyone have any suggestions. I thought about pre-priming the oil lines from the oil tank to the crankcase to hopefully help the system prime. I'd like to be able to add some oil to the crankcase to so I wouldn't feel so bad about running the engine for another 60 seconds without oil. I dropped just a little bit of oil in the spark plug hole to help condition the sleeve right now.

      What do I do? Anyone had or heard of an oil pump failure on these. Btw oil pump is working fine before I did the top-end rebuild and the oil pump was not touched.

      Please help!!! Thanks all for any and all help.

×
×
  • Create New...