Search the Community
Showing results for tags ' indicator'.
-
:confused:need a repair manual or help in what to look for thank you Bill for you muddober to make clear to you the neutral light and the gear light do not light up win shifting fuses are good Iuse my CAt for hunting im dissable the atv is my leag s thank you
-
The connector that that plugs into the switch evidently was caught by something while riding (I'm guessing) and a couple of wires were pulled out of the connector. I have attached a picture. Is there any where that I can get this female end with pigtails without buying the entire wiring harness? I'm a pretty good wire splicer and solderer.
-
i just purchased a very used 93 big bear 350, rebuilt the carb, changed all the fluids and got it running, everything seems to be working fine, but the reverse light stays on constantly, and the neutral light refuses to come on, all the bulbs work, i checked them with a 9v battery and some jumper wires. i have the service manual and am trying to make sense of the wiring schematic, but im not an electrician. i have tested voltage at all the wires for the lights and im getting 11.7 - 12.3v at both the brown and the blue. i don`t know if there is something im missing or if a previous owner rewired something wrong. seems to me though that one of those wires should be a ground and i should just get continuity, not voltage i am working my way through the harness, disconnecting, cleaning, greasing, and reconnecting everything and so far everything looks good, just dirty.
-
well.... this is a little strange... Occasionally when I am riding my Suzuki Twinpeaks 700 ('04) I will flip the thumbswitch to switch from 2wd, to 4wd (this its just a simple thumbswitch on the left side handgrip) and sometimes, I will get a blinking indicator light, and a non responsive transmission change. Also, sometimes I will get a little bit of clunking before it changes, and i have to slow down to a very slow speed before the transmission will make the switch. Any ideas? sometimes it does this, sometimes it does not. Ill throw out a percentage here 60% Works flawlessly 30% Only a blinking indicator light, remedy is simply restart the quad. 5% Indicator light, clunk and no transmission shift 2.5% Indicator light, Clunk, and transmission shift. 2.5% Clunk, transmission shift Any help is welcomed :] thank you for reading this post.
- 14 replies
-
- 2wd or 4wd
- blinking
- (and 4 more)