Search the Community
Showing results for tags ' yoke'.
Found 3 results
I need to know what the dimensions are on the shorter female yoke. I have 2 of the longer ones,need to machine down one of them. What I need is the distance between the center of the Spider hole to the top or end where the shaft slips in. Part #s 49177-1080 & 49177-1081. If anyone can help I would be most grateful. I took on this frame swap job for My Landlord, and its becoming a nightmare of mis ordered parts. I have access to a Mill & Lathe so I would rather whittle one down than wait for more parts. It appears from the parts diagram that the shorter one has a groove on the outside. Thanks Guys
Good morning. I have had this 2000 KingQuad since new - it has 2500 miles/hours on it. it appears that the front out put shaft yoke seal is leaking does anyone have any experience in replacing this seal and O-rings as described in the service manual? Also, can it be removed and replaced WITHOUT disassembly of the engine?
First post! Lets get to business. I picked up an Arctic Cat 400 a few weeks back and I've gotten to the last few repairs before she will be ready to ride. I'm missing the prop yoke that comes from the gearcase but after checking arcticcatpartshouse.com I noticed the diagram differed from my actually set up. The opposite yoke is actually welded onto a 3 bolt flange for mine but they don't show that on their diagram. Also I noticed this intense side to side motion from the 4 link suspension. The rear axle has been replaced and the suspension redone but I don' think it was done correctly because it has about 4 inches of side to side play. In my mind it could be one of two things, the link brackets are in the wrong location or the bushing are completely shot. And my bike is also full time 4x4.... I didn't even know the 400 could come like that lol Thank you for your time =)