Quantcast
Jump to content

Recommended Posts

Posted

Good after noon everyone, new here and really sure how to post anythang or get back to the topic I was lookn for so maybe u quad fans can help me out. I've got a 300 king quad that I really need info on. It's drivin me nuts . It starts and idles great but when I give it gas it spits and sputters. Anyone that could help me get lined out on this forum and my old quad u be a blessing .

Posted

I would try turning out the pilot screw out until it clears up a bit....up to 3 turns out from a fully seated position. If you need more than that, then I would get the next bigger jet and start again from 1/2 turn out and until you get 'er dialed in. Only turn it about 1/8 turn at a time...a little at a time will do a lot

  • Like 1
Posted
57 minutes ago, Reedygillespie said:

Good after noon everyone, new here and really sure how to post anythang or get back to the topic I was lookn for so maybe u quad fans can help me out. I've got a 300 king quad that I really need info on. It's drivin me nuts . It starts and idles great but when I give it gas it spits and sputters. Anyone that could help me get lined out on this forum and my old quad u be a blessing .

The problem  could be a failing spark  plug.  Fires ok  under idle but fails as soon  as a load is put on it.   If it  is in the  carb,  you could try turning  in the pilot screw to  closed , then  back it off 1 1/2  turns  ad try it .. Try  screwing the  screw in  and out  from  there as  fartknocker  suggests.

Here  is  a link to  a  service manual that will also  apply to your  quad.

https://www.quadcrazy.com/files/category/4-suzuki-atv/

Under the  browse /  download  button at the top  of the forum  are links to service manuals  and other  useful  info for members.

Posted

Thanks guys . I piddled with her a little today . Changed the plug , still the same.removed the air box noticed a lot of nasty in it , starts right up but the same. I noticed , I can cut it off and start it , it revs fine for a sec. (Every time) but then it starts sputtern.?

Posted

Should I remove and clean the carb. Had one since 95 but never had to clean the carb on one. Got this one from my father in law she only got 900 miles , and that was just for farm use. Org tires and all. Want to make her my little ride.

Posted

If it starts and revs fine  for a second and then  sputters ,  it  is starving for  fuel. You  need to  service the  carb. There  is a vacuum  piston/ diaphragm   on it that  may  be  damaged or leaking. The  high  speed  jet  could be  plugged or  one of the passages . If it  sat  for  a  long time with  old fuel  in the  carb,  it  is  most likely  badly  gunked up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
    • By TravisCr
      A year or so back bought a used 2003 Polaris Sportsman 700 Twin with a plow for keeping the gravel road around the house snow free-
      I've used it for the last year and it works well- have a bit of water in the oil I started a separate thread on.

      Are there any "gotcha" on using these things with plows?
      I took off the small polaris winch and added a Warn 2500, with synthentic rope so I wasn't getting poked by the wire-
      Looking for folks thoughts on these.
    • By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • By HHurks
      Hi to all
      Newbie here. Not new to ATVs. Look forward to learning a few new things and hope to maybe help some too.
×
×
  • Create New...