Quantcast
Jump to content

Need some help choosing!

streetspeed607

By streetspeed607
in General ATV Discussion

 Share

Recommended Posts

Stoopidbot1 Grand Master

Stoopidbot1

Posted
Posted

I'm sure that your Trike is a beast when it comes to top speed. But to go as far as saying you will whoop anyone you line up against is a little much. I know where you're coming from though. My ego is just as big when I sit on my CR500. I think I would take you up on that drag race. I have never lost on that bike due to lack of speed. I have been beat by better riders or the occasional mis-shift.

Link to comment
Share on other sites
mywifeknowseverythin Grand Master

mywifeknowseverythin

Posted
Posted
I'm sure that your Trike is a beast when it comes to top speed. But to go as far as saying you will whoop anyone you line up against is a little much. I know where you're coming from though. My ego is just as big when I sit on my CR500. I think I would take you up on that drag race. I have never lost on that bike due to lack of speed. I have been beat by better riders or the occasional mis-shift.

I never Said Bike,,,,,And I never said that I could Beat Anything....

Just Talkin SMACK!!!:laugh:

Link to comment
Share on other sites
  • 1 month later...
Ajmboy Grand Master

Ajmboy

Posted
Posted
I am planning on buying a four wheeler within 2 months. I have only ridden a few times in the last three years. Im looking for something that isn't going to need a lot of up keep. Deciding between 300ex, 400ex, wolverine 350 manual or maybe a warrior?

I even kinda like the idea of a 250 ex i know it wont have a ton of power but its not chain driven so up keep will be lower and its kinda sporty looking.

what are some of your thoughts? any other atvs you can reccomend?

I used to ride a lot when i was younger

Thanks

Did you get anything?

Link to comment
Share on other sites
powermaddd400ex Proficient

powermaddd400ex

Posted
Posted

i ride in nuthin but MUDDY trails. and the 400ex is perfect. it has a butt load of torque but lacks some top end. but a pipe should fix that problem. i ride the technical trails bewteen 3rd and 2nd but when have some more open space i get to 4th.

my old ride is a 250ex, i wouldnt reccomend it if ur over the age of 13 or 14. it will leave you wanting more speed. but that sob was bulletproof! all we had to do was change oil and wash the airfilter.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • mehim
      In search of the backwoods nudist campsites and ready to select the right ATV.
      By mehim
      Hi everyone. 
      Let me explain the thread title. 
      My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy. 
      We are most interested in a side by side unit but would love to get your thoughts. 
      Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit. 
      Thanks for reading and hope to hear from you. 

    • ResQ91
      Help with 1987 Yamaha Big Bear YFM350FWT Carb
      By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • Drillbit
      1997 Yamaha Kodiak 400 fouling plugs
      By Drillbit
      Hey all,
      I need some input on a problem I'm having with my Kodiak 400 that keeps fouling plugs. First off, I've done a lot of work to this thing, most of it all in good fun. Brake work, cv joints, u joints, carb kit, checked valve lash, compression good, changed all fluids, etc... My problem is it keeps fouling plugs very quickly. I can put a new (manual recommended plug) in and it starts right up, runs great, idles great, picks up good. Doesn't stutter at all. I ride it for 1/2 a mile, it cuts off and won't start back up. I let it sit overnight thinking maybe it got to hot. Try to start it the next day, nothing. Put a new plug in, fires right up, runs great for another 1/2 mile or so, dead. The plugs come out and look carbon fouled with dry black soot on them. I don't know if this is a fuel/air mixture problem or a ignition problem. A couple of things that I noticed is I never need to pull the choke out to start it. Also, when it starts it automatically idles high like an automatic choke would do, then it comes back down to a good idle. Also I noticed that the air/fuel mixture needle valve screw does nothing when I adjust it in or out. I can screw it all the way closed and the motor still runs and idles good. Any advice would be greatly appreciated. I'm almost leaning to a ignition breaking down the plugs??
      Thanks! 
    • McG75
      1996 Yamaha Timberwolf 4x4 Struts and Shocks
      By McG75
      Hello I’m new here and was wondering is anyone knew of good replacement part numbers for front struts and rear shocks for this atv? I think I’ve found a new rear shock, that looks like the original but there is no dimensions or anything and was wondering if there are any afterMarket new front struts available. I know it’s a long shot but any help would be appreciated. 
    • HSTAR
      1997 Yamaha big bear 350 Shift shaft issue
      By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...