-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Parham
This quad was a hot mess two weeks ago when I got it. I've been tinkering on it and have it running pretty good. It didn't have a pull start. I just got one and installed it today. Here's a little video of my first try at using it. Hope it's worthy of a "onya" from Mech! 🙂
IMG_3274_Trim.mp4 -
By Parham
I just bought this a couple of weeks ago. The oil sightglass was FULL. When I opened the fill plug, oil/gasoline LITERALLY gushed out and flowed for several seconds...FROM THE FILL PLUG! I drained it, changed the filter (no metal bits), and refilled with new oil. Opened up the carb and cleaned the float needle. Blew into the fuel inlet while manipulating the float and it seems to work. Buttoned everything back up and it runs good. Now my question...was the fuel getting into the engine because of a stuck float needle or is there something else wrong?
-
By Parham
Got engine issues sorted out...kinda. Engine starts easy and idles smooth. It had gasoline in the crankcase...lots of it. Drained, changed, and fixed stuck float. Now it won't shift into 3rd, 4th or 5th. Reverse works as it should. 1st and 2nd click easy and with no abnormal noise. 4WD, superlow, and LOCK all seem to work. What should I check next?
-
By BenderIsGreat
Hey all, I've been working on getting up enough posts to download the service manual, but in the mean time, maybe someone is interested if giving me a few deets in a reply? If not, no worries.
I'm look to confirm a couple things that I've picked up from Google searches.
First, I've heard that the factory mixture setting on the carb for this bike is 2 full turns out. Can people confirm? I've also heard that it's a fuel mix valve, not air, so screw in to lean, out to richen? Is that correct?
And for the valve clearances, I've heard two different specs, one is intake 0.004" and exhaust 0.006", and that other I heard from a youtuber who claimed this bike had 'very tight' valve clearances, said 0.002" intake, and 0.004" exhaust.
If anyone wants to comment on the above, I would be appreciative, if not though I'll keep posting until I can download that service manual
-
By Parham
Hello! New member here! Retired Navy Submarine veteran living in Georgia. I just picked up a 1998 Suzuki Quadrunner LT-F250 for CHEAP. Small 4WD double locker was exactly what I needed. It had LOTS of issues...gasoline in the crankcase, NO brake shoes, blown wheel cylinder, smokes BAD, only shifts into 1st, 2nd, and reverse, etc. Looking for all the help I can get to sort things out.
-
-
-
Gallery Images
-
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.