Quantcast
Jump to content


Oil Changes


Recommended Posts

Ok, I'm not trying to start an out of control thread, however I am interested in how often and what products you use for oil changes.  On all my vehicles I change oil at least as often as recommended by the manufacturer and use the recommended products or better.  That is where the debate should get interesting.  On my '20 Polaris 850, I use the Polaris recommended oil and filter and change once a year or more often depending on hours of operation.  In my trucks, I use Mobil full synthetic until I get them over 100K then I'll use a blend or high mileage oil--Valvoline or Mobil or NAPA.  Since I'm in NM Montana I use 0W20 to 5W30. 

Would like to hear what you're using.

Link to comment
Share on other sites

I also run Mobile 1 in all my vehicles have for 20 plus years and like it very much. In my ATV I have stuck with mineral oil , only because mine are older and that's what was recommended for them at the time of production,  not sure if that's right or not, but that's what I do. I do stick with the manufacturers oil, only for peace of mind, because I feel like it is formulated right for their engines. Im sure there are probably better oils out there but yamalube has one of the best rating iv read, but I don't always believe everything I read, especially on the internet. One more thing I might add I did change one of my older vehicles to synthetic, a 99 V8, that had been using mineral oil since new and I noticed that it seemed to burn more oil than before, and synthetic to me seems thinner than the the same weight in mineral oil, so I switched it to high mileage synthetic and it even burned more oil, just my experience.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BruceG
      Hi guys. I have a problem where the quad will start and run well for about 5 minutes and then it dies. On inspection the airbox has oil in it (quite a lot). The oil is pumping through the cylinder head breather hose. This problem first happened suddenly. I have since done the top end including, piston, gaskets, rings and valves. I have also done the carb (not that I thought that this was the problem). The compression seems normal. The only thing that I can think of, is that I did not grind the valves well enough. Anyone experienced this? If so, how did you fix it? Any other thoughts?
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Ajmboy
      Starting a new topic for the 2024 Presidential Elections. Please be respectable with open discussion 🙂.
      Wikipedia (See who has entered the race):
      2024 United States presidential election
      2024 Presidential Polls: 
      RealClearPoltics
      FiveThirtyEight
      270toWin Interactive Map

       
      Previous topics (now closed):
      2020 Presidential Election Discussion Thread
      2016 Presidential Election Discussion Thread
       
    • By Charlesbrown
      I’m looking for a top end kit for a Yamaha. I would like to see how well the engine runs before spending $6-$7 hundred on oem. Niche has complete kits from $1-$2 hundred.  Anyone have experience with Niche or similar Chinese companies? 
    • By Lafytafy
      should i run a thicker oil in a older quad because it make a little more noise than usual 
×
×
  • Create New...