Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By mike costa
Motor starts right up, but when I open it up past quarter throttle it bogs way down while ridding, the longer it runs the worse it gets. If I just leave it in neutral and give it full throttle it revs up and down.
Bike sat for 3 years,
Installed new plug, cleaned the fuel tank, took it to a shop and had the carburetor gone though.
Picked up from shop, motor bogged down first day and barely got me back to the truck an 1 mph.
Took back to shop after a month I was told it had a bad plug, I told him I just replaced it.
Got quad home and it is doing the same thing!!!!!!!!!
Thanks in advance for your support!
The carburetor has recently been gone through by a shop
My ranger crew 700 is hard to shift and gets locked into forward. When trying to shift into reverse we have to shut engine off. Shift then restart. Checked linkage and gears are fine. The RPMs arent really that high but did notice a little improvement when we lowered it. Did notice the throttle cable looks damaged. Could this be the issue?
Let me start with I have about 30 years of ATC experience, but not much with stuff made after 1988. Some, but I'm mechanically inclined so it's all good. I"m rehabbing a 1997 Bayou 220 to send back into the wild and the mechanicals are now all good, just working on making the electrical system...electric. Right now, I have no power on the white wire as tested directly on the plug at the starter solenoid. I'm assuming that wire is supposed to be hot any time it's attached to a battery? The genius that had it before snipped a couple wires and inserted a fairly heavy push button for electric start bypassing the electrical system. I think i've corrected everything north of the solenoid but the white wire has me stumped. Is my assumption that this should always be hot with a hot battery correct? Does this indicate a broken circuit in the starter solenoid? Relay was also bad and wired incorrectly, but that's resolved and I can make the relay click bypassing the solenoid and connector, directly giving the white wire 12V. Thoughts?
This past weekend the 2019 ATV Motocross Championship (ATVMX) Series, an AMA National Championship, took over Loretta Lynn Ranch in Hurricane Mills, Tennessee. Hot and humid conditions greeted the AMA Pro ATV athletes, and the cloud coverage that graced the facility seemed to disperse as the riders lined the gate for moto one. Eighteen riders took to the gate for the penultimate round of racing.
View the full article
I'm curious what all the ladies ride on this site and why!
I ride a 2008 Yamaha Rhino 700. Just added a new roll cage, dual exhaust and some other things. Here are a few pics:
I chose the Rhino because my arms and wrists get way too tired on a quad. I haven't tried a bike, but, I don't think my coordination would be good enough to handle that!
I LOVE my Rhino though!!!!!!! It's the perfect machine for me.
So, how about you????
Similar Tagged Content
How hard is it to change the outer seals on the rear differential mine are leaking fluid and I have no idea on how to change them out any help would be great thanks
This is my first post and I was wondering if there is anyone who can help me solve a problem I have with my Yamaha Kodiak 400 4x4 Fitted with a Mikuni Carburetor . The year of the quad is around 1998, the reason I am not sure of the date is, there wasn't any paperwork and no details on the frame either.
The quad had a bad leak from the carb overflow which indicated that the float needle valve was blocked or passing so I replaced this and put everything back together. The quad ran really well until I took it onto some rough ground to have a ride around, a few hours later the engine started to run really rough as if the engine was flooding. I have removed the carb again and cleaned the needle valve out and the whole of the carb just in case there where any dirt behind it. Engine now runs fine again but fuel has started to run out the carb overflow again.
I have tried everything to try and stop the fuel leaking out the overflow but its still happening. My last thoughts where to adjust the float level and its still happening.
Has anyone got any thoughts on the problem or could suggest whats causing the fuel leaking out the overflow.
Thanks for reading
:confused:need a repair manual or help in what to look for thank you Bill
for you muddober to make clear to you the neutral light and the gear light
do not light up win shifting fuses are good Iuse my CAt for hunting im dissable the atv is my leag s thank you
Recently Browsing 0 members
No registered users viewing this page.