Quantcast
Jump to content

Site Maintenance

Admin

By Admin
in Announcements/Support

 Share

Recommended Posts

Admin

Admin

Posted
Posted

Currently, QUADCRAZY is undergoing site maintenance and upgrades over the next few days. There are a few sections that are down: Video and Trails. They should be back up in a few days as everything else is done first.

Most of the work is due to security updates and getting ourselves up to date. We've made so many additions over the past few years, things internally are not working the way they should be.

I am glad to say that we were offline for an hour or so, and now back up. People can log in and all.

The chatbar is gone for now to set up for a newer style bar. The chatroom has been defaulted to our original basic chatroon. I'll bring back the other chat in a couple of days.

Our video section is getting a little overhaul also.

Trails will be down through next week.

User's garages are also down for now.

Please post in this thread if you experience issues outside of this stuff. Thanks!

Admin

Admin

Posted
  • Author
Posted

Just an update: Maintenance is still going on. Trails are still down.

Other sections are slowly getting back to normal. New footerbar issues have been resolved. (make sure under status you are connected, otherwise your friends will not see you).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Forum Topics

    • quadcrazy
      Welcome to QUADCRAZY!
      By quadcrazy
      If you are a new member, why not introduce yourself? This community thrives and grows with you and all our current members! We all want this community to grow and encourage new member registrations. That being said please help out QuadCRAZY by inviting other atv'ers to the community.
      QUADCRAZY NEEDS YOU!
    • mga
      Back to the clutch adjustments...
      By mga
      I get it, turn counterclockwise will decrease, turn clockwise will increase.  My question is what exactly am i increasing or decreasing? Is it clutch pressure? In many videos i've seen it's always "turn counterclockwise" until you feel resistance then back off. Why is it always to decrease? 
      I'm just curious as to what exactly is going on when i turn that screw right or left. And, since there's no manual clutch to engage or disengage, what is going on inside? 
      Reason why i'm asking is while going down a hill in 1st gear, it appears to pops out of gear, but no neutral light, and if i stop, it's in 1st gear still. BUT, (always a but) if the engine is warmed up, it stays in 1st gear. The hill is too steep to use any other gear, so 1st with the brakes is the only way to go down.
    • DrtyGrlKristin
      Are you new to the site? Where are you from?
      By DrtyGrlKristin
      Just thought I'd start a new thread for newbies to the site!
      If you're new here, tell us who you are, where you're from and what you ride!!!
      Lets get to know each other a little better shall we?
      I'm not new to the site, obviously, but...
      I'm Kristin from Denver!!! I ride a 2008 Yamaha Rhino. She's my muddy baby!!!!!! Several aftermarket parts on her. She's good to me! We try and ride every weekend. This weekend we're off to MOAB! :woot:
    • mattgoodwin
      (Pic included) Need info on how to re-wire wire harness side stator 3 pin connector back on. 96 Timberwolf
      By mattgoodwin
      I'm repairing a 96 Timberwolf 2x4. Many years ago a dog chewed the wires that go from stator to the rectifier/regulator, and I've had to use the pull start ever since. Ive since lost the plug for the stator and on the wiring harness side. I'm ordering a new stator that will also come with the female plug that I need to fix it on the wiring harness side, but I have no clue in what position to put those 3 white wires(ones I'm holding with electrical tape on them) back into the new plug. Since they're all the same color, does it matter? Any info on this or pictures anyone has of their own will be very much appreciated.

    • anthonyd256
      Is there a conversion for 99 beartracker rear brakes from drum to disc
      By anthonyd256
      I have a 99 Yamaha bear tracker and I have converted the front brakes from drum to disc fairly easy but I cant figure out how to convert the rear with out hacking apart the rear arm. tried to use parts from a wolverine since the rear arms look similar but the caliper mount didn't line up on the bear tracker axle. Can anyone give me any clues or has anyone successfully converted the bear tracker rear brakes. I would even purchase a conversion kit if there is one. Any help on this would be greatly appreciated.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...