Quantcast
Jump to content

Recommended Posts

Posted

I have a 99 or 2000 Xplorer 4x4 my daughter washed it for me and took the seat off so not sure if she got some water where she wasn't supose to or I just have a problem.

I started it fine after she washed it and now two days later it won't start!

I changed the spark plug and smell gas when I tried to start it but just wont take off! I pulled the plug and pulled the starter chord and it will spark just wont do anything.

Also I need a good battery

Thanks a million for the help guys I am a career Firefighter so I have no idea how to really do thing like this or know about this stuff at all!

Posted

Guys thanks a bunch I will check it again, I don't remember there being really alot of dirt on the spounge looking thing under the seat but I'll make sure.

She didn't use a power washer just the hose and I told her to be carefu around that.

I have pull started it for months now and its fired right up, just too lazy to get a new battery.

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By en4cer
      Problem number 1,
      2000 Polaris Xplorer 400.  No start, has spark. Has fuel ,found Low Compression less than 60 psi.  What to do next?? Going crazy here.  
      Problem number 2. 
      1994 polaris Sportsman 400 starter won't engage.  Button on left side with  light switch seems to be almost stuck in, weak spring behind button?
       
      Any help would be nice.
      Thanks Chris in West Central Minnesota
       
       
×
×
  • Create New...