Quantcast
Jump to content

Recommended Posts

Posted

After riding my quad for a couple of hours it will shut off. After sitting for a short while, it will start again and run for a short while. It seems the fan is not coming on as it should. Has anyone else experienced this problem with their Polaris? :confused:

Posted

I have not experienced this problem because I don't own a Polaris, but if the fan isn't coming on, and the machine is getting too hot, there could be a thermal overload switch that shuts the machine off when it gets too hot. Are there any overheat warning lights on the machine? You could try to wire the fan to a switch so it stays on (temporarily) and see if the machine will keep running then. It could also be a problem with one of the secondary ignition components; stator, cdi, coil, regulator/rectifier. Sometimes these parts will begin to malfunction as they get warm.

Posted

Is it overheating? Is that why you feel the fan is not coming on when it should?

It may very well be your fuel pump, shutting off after getting hot. Whe you run into an issue where it will not run, start testing circuits to see what system is off...fuel or ignition. If it is overheating, I belive it does have a cooolant temp sensor on that machine that could be your issue.

  • 1 month later...
  • 5 months later...
Posted
After riding my quad for a couple of hours it will shut off. After sitting for a short while, it will start again and run for a short while. It seems the fan is not coming on as it should. Has anyone else experienced this problem with their Polaris? :confused:

I have a 2006 Polaris sportsman 500 efi. I had a problem with my bike getting alittle hot. I found it to be the radiator. there was dirt in the fins from the bottom to the middle of it. Clean the dirt out with a garden hose very gently as the fins will bend easy. underneath the gas tank on the left side you'll see a plug, pull it out while running and see if the fan comes on. if it does your fan is fine. Check this first to see what happens.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











×
×
  • Create New...