Quantcast
Jump to content

Recommended Posts

Posted

After riding my quad for a couple of hours it will shut off. After sitting for a short while, it will start again and run for a short while. It seems the fan is not coming on as it should. Has anyone else experienced this problem with their Polaris? :confused:

Posted

I have not experienced this problem because I don't own a Polaris, but if the fan isn't coming on, and the machine is getting too hot, there could be a thermal overload switch that shuts the machine off when it gets too hot. Are there any overheat warning lights on the machine? You could try to wire the fan to a switch so it stays on (temporarily) and see if the machine will keep running then. It could also be a problem with one of the secondary ignition components; stator, cdi, coil, regulator/rectifier. Sometimes these parts will begin to malfunction as they get warm.

Posted

Is it overheating? Is that why you feel the fan is not coming on when it should?

It may very well be your fuel pump, shutting off after getting hot. Whe you run into an issue where it will not run, start testing circuits to see what system is off...fuel or ignition. If it is overheating, I belive it does have a cooolant temp sensor on that machine that could be your issue.

  • 1 month later...
  • 5 months later...
Posted
After riding my quad for a couple of hours it will shut off. After sitting for a short while, it will start again and run for a short while. It seems the fan is not coming on as it should. Has anyone else experienced this problem with their Polaris? :confused:

I have a 2006 Polaris sportsman 500 efi. I had a problem with my bike getting alittle hot. I found it to be the radiator. there was dirt in the fins from the bottom to the middle of it. Clean the dirt out with a garden hose very gently as the fins will bend easy. underneath the gas tank on the left side you'll see a plug, pull it out while running and see if the fan comes on. if it does your fan is fine. Check this first to see what happens.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By jeffinotown
      Hey guys and gals. I've been working on my friends 2007 big bear IRS. Unfortunately after 3 different people got their hands on it and only made things worse every time.  After months of finding just crazy problems everywhere. I'm finally at the point we're its almost 100% !!! But I'm getting a short somewhere between the 4xW switch I believe. I managed to by searching the internet like a  fiend, got my hands on an official Yamaha wire harness for the year and make. But I don't have the numbered component list and to be honest. After hours of going through and making everything so it's  easy to reference. If anyone has a picture of the referenced components. I would be forever in your debt. I've spent hours marking up the blown up diagram so it will be easy, for any possible future repairs. Please and thank you. Here's a picture of what i have so far.  Unsealed it in plastic so oil and crap won't spill or get smudged. This damn things worth it's weight in gold.              Thanks Jeff                2007 Yamaha big bear 400 IRS.       YFM40FBW
×
×
  • Create New...