Quantcast
Jump to content


Yo from Vegas!


John_in_Vegas

Recommended Posts

Heys, glad I found this place! Been riding off road 30+ years and onlf got my first quad a couple months ago. I got hurt real bad on my bike around turky day, balance is off a bit so I got the quad to help my race club set up our race course. Just my luck, the doc said no driving anything yet so its been sitting in the garage tempting me. Its an 88 yamaha Blaster in ok condition. Nice and easy to work on when it needs it. Im looking forward to picking some your brains for tips and advice in the very near future!

John in Vegas

Link to comment
Share on other sites

Welcome John in Vegas, I had a Blaster once myself, it is a simple and reliable machine, and easy to work on like you said. Plus, there is tons of power potential in that little pinger. I have seen highly modified Blasters eat mildly modified Raptor 700's for lunch. Feel free to pick away when you need to know anything.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By ATVNetwork
      Round three of the 2024 ATV Motocross National Championship (ATVMX) Series, an AMA National Championship, headed to Lizella, Georgia to provide yet another action packed weekend of ATVMX racing on the sands of the Echeconnee MX facility. View the full article
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • By ATVNetwork
      The ATV Motocross National Championship (ATVMX) Series, an AMA National Championship, rolled into the Underground MX Park in Kemp, Texas with a full schedule of racing on tap. View the full article
×
×
  • Create New...