Quantcast
Jump to content

Headlight Covers

rappy97

By rappy97
in General ATV Discussion

 Share

Recommended Posts

rappy97 Rising Star

rappy97

Posted
Posted

A guy on another forum started selling these, he owns a print shop. They do stickers for trailers, trucks, make shirts... etc. I got some of these headlight covers from him, and they are so awesome! They block hardly any light, 60% of the cover is holes. IMHO you cant even tell they are on the headlights when riding at night. He has them for the 700R style (Raptor 700, YFZ, 350, and 250A), KFX450R, and the 660R. He is also looking to make some RZR ones aswell. I had them on throughout the winter, and just went on a 70 mile trail/road ride and several washings, and they are holding up great, and still look great. Dan is a really cool guy. He is now making custom ones also. Thanks.

His Website -> Flash Intro Page

Alfredo.jpg

qwknbad.jpg

ME.jpg

06RaptorGirl.jpg

NHRAdragracer1.jpg

NHRAdragracer.jpg

101_1659.jpg

  • 4 weeks later...
  • 3 months later...
  • 3 weeks later...
RuKind007 Contributor

RuKind007

Posted
Posted

There is a video on Utube.If you use a heat gun,cleaning lens and read the instructions it is very easy and will last years I am sure of that. I have done store windows,trucks and 100+ ATVs. There is no way you can get something that works good and improves the look of a Raptor for under $20.00 shipped to your door.DansBackUp195-1.jpg

KnightHawk Collaborator

KnightHawk

Posted
Posted

Well to give him some help. He needs a set of headlights for what ever they are to be made for so he can get size measurements. If he doesn't have access to a set of the lights in question then how is he to make the design.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • Mreoiwerk
      UTV seat covers
      By Mreoiwerk
      Hey, I'm thinking of upgrading my stock sport glide seat with memory foam as a bit of a project. I've seen how some guys use the heavy-duty padding inside the water repellent UTV seat cover fit Polaris Ranger XP 1000 crew for their UTV projects and wanted to try something similar for my bike.
      Has anyone done a DIY foam upgrade and have any tips? What sort of foam density would people recommend, and how easy is it to remove and refit the factory seat cover over the new padding? Any advice gratefully received! 
    • OldATVowner
      99 Bear tracker no neutral or reverse light or start button
      By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • Rockbottom
      Big bear 400 new stator reverse light stays on
      By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • BruinBeater
      Another FNG
      By BruinBeater
      Hey all, BruinBeater here.  Just joined up from the Pittsburgh, PA area.
      Got a Polaris Sportsman 1000 and a 570 in the garage that don't get ridden quite enough but looking forward to a family trip this fall.
      I'm the unofficial mechanic of the extended family.  In the past month or so I've replaced a transmission in a Chevy Silverado, rust repair on a Chevy Malibu, electrical repair on a Subaru Crosstrek, overheating issue solved on a Can Am Commander, and right now I have a pair of Grizzly and a Bruin 350 in the garage.  Both have a no start condition and have been sitting for 2+ years.  
    • middlebrookgt
      2006 LT-F400F stator/generator cover change: What is the best way to check that all is good with the transfer operation before reassembling?
      By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...