Quantcast
Jump to content

Recommended Posts

Posted

Well Nassau, Suffolk, Brooklyn, Queens, and Staten Island dont touch NY State. Plus if you head directly west off of Long Island you go into New Jersey and then PA. You have to go northwest off of LI, cross a bridge, then your in NY.

Every few years a rebellious group of LIers attempt to get LI to become the 51st state because NYS taxes us so heavily (Manhattan and surrounding area exchange alot of $$$). It never happens and quiets down after a few months.

We are the really hot red headed step child that NY likes to touch in the naughty places

Posted

hawaii doesn't touch north america...

Your right and it is its own seperate state!

.. but i think its a matter of who funds the state isn't it?

With our tax rate being 7 fold compared to the rest of NY state I believe its us who is really funding NY :biggrin:

Posted (edited)

i'm not a political guy, so i really didn't want to be involved in this. i'm just on the sidelines here.... hence my posting and i quote "i don't want to be caught in the middle because i'm an easy target being canadian .... i'll shut up now .... sorry ....." .... talk to your congressman or take a vote, there are alot of things unfair in life, and you have to take it dry most of the time.... just saying ....

i could bi*** all day about mulroney selling canada out with the free trade, but where will it get me? prob same place you think your tax is too high... all a game in politics, and this site is for atv's so, again,,, i'll just shut up ....

Edited by oxidized_black
Posted
i'm not a political guy, so i really didn't want to be involved in this. i'm just on the sidelines here.... hence my posting and i quote "i don't want to be caught in the middle because i'm an easy target being canadian .... i'll shut up now .... sorry ....." .... talk to your congressman or take a vote, there are alot of things unfair in life, and you have to take it dry most of the time.... just saying ....

:yes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Popular Now

  • Similar Forum Topics

    • By Gtc4d
      I recently purchased a raptor 80 for my grandson for  christmas. I am trying to make sure it is running properly. i have rebuilt the carb and adjusted the carb idle then the mixture to middle of where it runs rough and it runs great for about a min or 2. then it stalls out. I can usually choke it and it will start so i feel it is lacking fuel. the fuel shutoff valve has been changed and i checked it for good fuel flow.  any ideas of what to check next. I am planning to vfy fuel float height tomorrow. I visually checked it by turning carb upside down when i had it apart and it looked level. any ideas are appreciated. 
       
      Thanks.
      Todd
    • By jordan_ATV
      I got a 2005 350 Raptor Special Edition and I'm dealing with a no start issue; the weirdest thing is when I'm cranking it fires and slows down showing signs of pre firing, smoke shoots out the carburetor every time it sparks. every electrical part (CDI, Rectifier, Stator, Coil) has been swapped out from previous owner, the top end of the engines all new and I cleaned the carb out, anyone got any ideas or similar problems, also is it possible to have a bad spark timing
    • By McClaw
      Hi Guys, I'm new to this forum.
      I have been riding quads for the last 20 years, however my quads are extremely old and outdated, all three are about 20 years old LOL.
      I have been looking at upgrading, but need your input.
      I've narrowed it down to the Polaris Sportsman XP 1000 S or the Honda FourTrax Foreman 4x4 EPS
      What do you guys think?
       
       
    • By TravisCr
      I bought this from a buddy to plow snow up in the North Eastern Washington- its been getting oil in the water and I've been changing the oil often and adding collant as necessary-
      I've taken the stator cover off and I'm looking at the Oil Seal and water pump seal and they look good- Although I've ordered a factory oil Seal I'm looking at putting it in this afternoon-
      I don't have the factory service manual- am I suppose to Add RTV to the Stator cover Gasket? I've seen some folks suggest grease other suggest RTV?

      Any suggestions here- I'm trying to reassemble it tonight- I looked at downloading the manual but need to get up to 10 posts firsts it looks like-

      I appreciate any suggestions- normally I'm a jeep and honda dirt bike guy- but  I got a good deal on the quad and a plow so I went for it
      Its got a bit over 3K and runs pretty good- but I've had her tore apart for 3 weeks to figure out the oil in the coolant issue.
    • By KdlH
      Hello.
      I'm new to the forum, I live in the UK. I have just bought a 1995 Yamaha Moto 4 350.
      Generally the condition isn't too bad (I paid very little for it!), it looks quite original and all the plastics are quite good. The bad bits are no brakes, the rear axle bearings are shot and the transmission won't shift through the gears properly.
      I'm not planning on a full rebuild but I would like to sort it out a bit. The transmission is my main concern. If anyone has any ideas on what might be the cause I would be grateful. I can explain what's happening in more detail if required.
      Thanks everyone,
      Kester
       



×
×
  • Create New...