Quantcast
Jump to content


More Desert Rid'in


Recommended Posts

Went out to the Pony Express Route area by Vernon, Utah again yesterday. Had a blast, but dang it was cold & the wind didn't help. I froze my tush off !! :shock2: ... The weather guys said, Warm & Sunny ... but when I got there it was 27 degs, windy, overcast with a threat of rain ... good thing I took a couple extra shirts with me. And I had to put my Gore-Tex rain bibs on to protect my ........ legs ... so much for "Warm Weather Riding" ... you'd think I was still winter rid'in with the tracks !! :nopityc:

I did 57.3 miles today and this is unusal for me, but there was lots of road riding betwix the areas to wheel. Got into some sticky black mud, some snow, & yup, some dust. It was a Great Day !! :partyc:

The 30th of Mar 2011 is when I took my first ride with my Can-Am, and as of today, almost one year later, I have 1,758.7 miles on that Bad Boy !! ... Not bad Huh !!?? :cheer: ... and that's true miles, cause I bought the 3rd Position Track module which gives true miles driven & speed when the tracks are on ... so ... to alll you nay sayers ... :slap:

Lots of roads out here, lots to see ... a guy can ride fast and still do lots of techincal riding ... :drivingc:

Well, here's the link to the slideshow ... hope ya like the photo's .... :cheers2c:

Image hosting, free photo sharing & video sharing at Photobucket

...

Link to comment
Share on other sites

THANKS Guys !! Glad you enjoyed the photo's !! :bow: ... :bow:

Yup Oxidized, the bike is keeping me busy ... or is it, I'm keep'in the bike busy ?? :coolgleamAc: ......... anyway, I'm purty darn happy with it .... :woot:

And Yes guys, it's a purty nice place to ride ... this time of year. Once it gets warm, the bugs will be bad & it gets REAL hot out there !! ...... but when that happens, I just go back to the mountains !! :wiggle:

...

Link to comment
Share on other sites

wow Gunny you really DO put some miles on that quad,,,looks like a great place to ride, wished we had places here like that!!:wink:

I try my friend, I try !! ... :drivingc:

We do have some pretty good riding out here, but I say the same thing when I see everyone elses photo's too .... so it's all good .... just wish I could travel a lot & try it all out !! ... :cheer: ... :bannana_guitar: ... :wiggle:

Glad you enjoyed the photo's ... :cheers2c:

...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • By luckyyyyesther
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad(a newbie on ATV). I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!



    • By opnea
      Recently picked up a 1991 Lt230e for repair. Compression is a little low Id say, around 80psi, I also have spark but the spark is odd . When cranking the spark is a constant arc. I’ve got it to sputter but never fully turn on. I believe the spark is my issue, being constant and not detonating at the right time. I’m not sure whether this issue is an electrical fault like some missing ground, a faulty cdi, or a timing issue. Any ideas where I should start? 
    • By p5200
      I added more fresh gas it sat one day now, it's acting up again. Before cleaning out carburetor it wouldn't idle good and had gas leaks from carburetor. Now it idles pretty good but, if I increase throttle speed at a certain amount it starts missing bad. I'm going to try and post a short video. Just about ready to give up on this thing.😒  you can see reflection perking in video.

      20240217_114429.mp4
    • By goodkid_6
      I have a 1989 quadrunner LT160. I am looking to replace the plastics. I can't find them for the 89 specifically but I do see plastics for a 91 - 01. Is there a difference in the 89 to the 91 - 01 plastics? From the photos, they appear to be the same with the exception of the holes for the front and rear racks. 
      Please help clarify if you can. Thanks!
×
×
  • Create New...