Quantcast
Jump to content

Recommended Posts

Posted

I bought a 200x nt sure what year not running. All the wires from the engine to cdi to cdi box

To spark plug . Got it rigged up and now it has spark- i got it to fire twice yesterday for about 3-4 seconds each time. It has a diff style MIC carb on it. Its gettin gas to the bowl but from there i am not sure. From the carb back there is no air hose idk i that makes a difference or nt. i am lookin for the correct way to connect the ignition system. And does anyone knw were to get a 200x carb for cheap?

Posted

How is the right way to test if soark is strong enough? And how to see if fuel is makin it into engine. And wht kinda plug should i be usin? And does the open air hose make a difference?

Posted

I can see into the carb but how would i knw if gas is squirtin its nt fuel injected so wouldnt it use vaccum??And the soark is blue i held onto end while kickin it and it shocked me. When i kick it it sputters and shoots pressure out of the carb. Could it be getin to much air with straight ipen carb to engine??

Posted

Its a 200x trike- but the carb is off of something else according to the honda dealer . And i cant really see gas squirtin but a white haze in there every once in a while. It smells like gas while i kick it. An it putts once in a great while.. I have takin the carb completely apart and i cleaned every hole.

Posted

you need gas spark and air for a motor to run if u have spark make sure ur getting gas then check ur air box if ur getting all that its prolly electrical issue ur have and take it to ur local shop and have them test it it cost me 40.00 to do it

Posted

try the mpst stupid crap u can think of i had a 200 es with those its the stupid sh** that dont make it work... try some carb spray or starter fluid in the carb

Posted

Its hard with plug in real easy withnout-- and i can see the blur

Spark- and i can get it to fire once in a great while foolin around with it. The carb is open on the intake end and the gas is gettin to carb. But the float bowl is aleays full of gas

Posted

Alright it has blue spark, it is getting fuel into the carb.... But still wont start up. Could the spark be too weak? If i hold hand over carb and kick

It my hand gets soaked with gas. The spark is blue but it is a little spark. And i found out the carb is a 30mm aftermarket.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
×
×
  • Create New...