Quantcast
Jump to content


New member from GA


Recommended Posts

Hello all! I am a new memeber from Macon, GA! I actually just purchased my first quad on tuesday. It's an older one that needs a little bit of work but for the price given I think I still got an ok deal on it. The quad is a 1995 Yamaha Moto-4 350.

I don't know if anyone on here is familiar with the Moto-4 but I figure while I am going on and on I can go ahead and ask a few questions. Any idea why you can't find a carb rebuild kit for the 1995 model? I can find them all the way up to 1993 but not 1995. I even called the dealer and they can only get up to a 1993. what size tires do you think would clear without scrubbing on the Moto-4?

Thanks for taking the time to read what i wrote! and hopefully thanks for the responses to the questions asked!

Link to comment
Share on other sites

hello and welcome to QC !!!

in the yamaha forum there is a thread, yamaha atv manuals, post #3 you can download the service manual. 27" tires would probably be the tallest you could get away with without a lift. the carb rebuild kits are available through moose racing. if you go into ebay and search and find something close ('93), email the seller and they can fix you up ...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Need-help-with-quads
      So I have an 89 Yamaha moto 4 250cc and when I ride it, itll get hot after like 10-15 mins and then will just die and turn off.
      It's has new carb rebuild, new air filter, new battery, new spark plug so I don't think it's a crack in the spark plug
      Can anyone help me?
    • By pitts
      Just joined so I can download a manual and In the process of making my 10 posts.
    • By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
    • By oxidized_black
      Yamaha ATV manuals are located in the downloads section here at QUADCRAZY.
      Please visit the downloads section at https://www.quadcrazy.com/files/
      Get 15% at emanualsonline.com with coupon code EMOAFF
      Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
      Clymer ATV Manual - Yamaha Raptor 700R
       
    • By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
×
×
  • Create New...