Quantcast
Jump to content


2007 Suzuki King Quad 700 Reverse Acceleration Poor


Recommended Posts

Altough I new to the forum I not new to riding. I have been riding for a few years at different parks around the Houston area and enjoy every minute I get to ride. Just recently I have encountered a problem with my quad. After riding the trails I had helped someone back to their vehicle by pulling them. Their front ball joint had snapped so I put my quad in reverse to pull him so I could watch and make sure nothing happened. Ever since then when I go in reverse under heavy acceleration my quad boggs down. I can use the over ride button with no problem when pushed. I have already replaced the belt and cleaned the clutch plates really well. I am at a lose. Any suggestions?

2007 Suzuki King Quad 700 4X4

Thanks

Link to comment
Share on other sites

Does it sound like its mechanically (linear) bogging down or electronically (sorta like on then off) when in reverse. Im not familiar with a KQ but maybe someone else knows more

Just as a check...when going forward slowdown to a stop. Do not use the brakes at all. Then shift into reverse and try to accelerate. Sometimes mud gets stuck in the brakes and pushes the pads outward in one direction

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Edited by marioweldinginc
Link to comment
Share on other sites

No mud stuck in brakes. Once I use the over ride button it hauls butt in reverse. It almost sounds like to me like a slight popopopopop. Maybe its starving for fuel? I ordered a fuel pump thinking maybe this will fix it. (Not installed yet, waiting on shippment) I took it out yesterday for a short test run after I reset the computer and still has same issue. What I have noticed also is in 4wd high and the front locker switch on it does same thing but 4wd low has power.

Link to comment
Share on other sites

Are you sure you didn't just notice that this is happening in reverse? My 2005 always bogged down if too fast in reverse which is what the override button was for. It's designed to limit the drive train in reverse to my understanding.

* Added year, make, and model to thread title.

Link to comment
Share on other sites

I was gunna suggest that it was designed that way as a failsafe but I was wondering why it happened after the big pull. unless it wasnt working and then it decided to work

Is there anyway to pull codes from this machine???

I wondered also after the pull if something was damaged, but I then remembered going in reverse out of mud and it would sputter like crazy unless I hit the override button. That was on my 2005 King Quad.

Link to comment
Share on other sites

  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
×
×
  • Create New...