Quantcast
Jump to content

Recommended Posts

Posted

hey guys my name is preston and i just joinned the fourm and so far i am glad i did so. that aside me and my frien jus aquired a 1985 polaris trail boss with a blown motor for $50 and we have a crazy plan for it.

we wanna take the existing frame ans strip it down to a rolling frame and then turn it into a go kart. Now the reason that we wish to do so is because we think its a moderatly easy way to build a Kart with both front and rear suspension.

i am wondering if anybody has tried this with similar quads or any input in general would be great.

Posted

Not sure how heavy it's gonna be... the plan is to shave as much unnecessary metal off as possible. For the wheels and tires im thinking keeping it stock and using a modified version of the CVT transmission. As far as the motor goes we are going to start small, like a 5hp Briggs as a starting spot to get the suspension and drive line fine tuned. Then we are probably going to drop in the biggest motor we can find or it will safely Handel.

Posted

Later today I will be posting pictures of the quad. Unfortunately we have determined that the 2 stroke 250cc engine that came with the trail boss is not salvageable. So no th only motor w have is a 5hp Briggs motor that we will half to run until we acquire a bite bike or atv motor.

As far as the build is concerned we have decided to remove the transmission and mount the motor there with a centrifugal clutch to start off just to get it moving. We plan on cutting the frame in half and extending it about 3 1/2 to 4 feet in length to add space for a seat and leg room. We are going to cut out the back bone of the frame so we have room for our heads and w will add supports running parallel to the bottom tubes of the frame. I realize the May be hard to visualize but I will post picture along with my best friend who will hopefully be joining the forums soon.

Posted

so I have finally decided to cut the quads frame. I just need to decide on a tube diameter and thickness to weld to the existing ATV frame.

Posted

Hey my names richie and I'm building this go kart along with Preston. Here are some pictures of the atv we are gunna start the go kart build off of. 8iqsurpk

  • 4 weeks later...
Posted

so I got a motor for the go kart. It's a kawasaki 750cc ninja motor that I traded for a couple of antique tractors for. The problem is I need an ignition system which will cost me like $400... so I nee to come up with some money.

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

×
×
  • Create New...