Quantcast
Jump to content


2000 Polaris Scrambler 50 starting problem

mearnheart

By mearnheart
in Polaris ATV Forum

 Share

Recommended Posts

mearnheart Newbie

mearnheart

Posted
Posted

I have a 2000 Polaris Scrambler 50 with a new starter and new battery. The battery and starter are strong but when engaging the starter it wont start. But it will start with a manual crank. There are 3 unconnected wires under the cover, but I dont know where they go. Am I missing a part that might be preventing the starter from starting it? Maybe some safety switch or something? Does anyone have a manual for this model for download? Thanks in advance for any help!

Link to comment
Share on other sites
oxidized_black Grand Master

oxidized_black

Posted
Posted

i am having the same problem with my 660 grizz ... i have a new battery and it will wind the engine over fine, but will not start it. pull the start cord and fires up every time :confused:

i almost think that it has to be a weak coil maybe? hope someone else can jump in and give us both a heads up on this ... i for one am too old to be reefing on a pull cord :cute:

Link to comment
Share on other sites
mearnheart Newbie

mearnheart

Posted
  • Author
Posted

Thanks oxidized_black for the reply. I called the Polaris dealer yesterday and was describing it to them. They seem to think that the compression might be too low and that the top end needs to be rebuilt. They want me to bring it in to diagnose it. But I was hoping for a cheaper solution. I dont really believe low compression should be the problem since it starts and runs fine after a manual crank. I would think that if the compression was too low it wouldnt start then either. (but im not a mechanic and dont really know :-) ) Also, i pulled the spark plug and ground it on the frame as I hit the starter and theres plenty of spark.

Link to comment
Share on other sites
  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • McG75
      New Yamaha Timberwolf Rear Shock Found!
      By McG75
      Sorry I suck at these forums so if you see this submitted under update status, my bad. Anyhow this is a new shock for a 96 Yamaha Kodiak 400 4x4 it fits my 96 Yamaha Timberwolf 250 4x4 perfectly. Little narrower are the bottom than the original but everything else is perfect. I extended it to almost a half in from full extension because I’m pushing 350 pounds.  It rides and hold me well. So if any of y'allRace driven shock. have been looking for one and didn’t want to do the research here it is. 





    • rgeiser
      2003 Polaris Ranger 400-500 Service Manual
      By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • Gwbarm
      Looking to buy a new SUV
      By Gwbarm
      I have been exploring all the options available, so many, its hard to choose. I have kind of narrowed it down to the Honda Pilot, Subaru Outback, and Kind of looking at the Outlander, although its a little small,  the new one is nice looking. Just wondering if anyone has any recommendations or gripes with any of these rides. I have driven Jeeps for the past 25  years and they have been great, but their price point has gotten to high. Expieriences good or bad would be helpful. Thanks!
    • kiriyaaoi
      2002 Quadrunner 250- Knackered cam and journal/"bearings", difference between 2001-2002 part and 2000 and earlier
      By kiriyaaoi
      Hello everyone, I just picked up an 02 LT-F250F the other day and have been in the process of tearing it down to fix some stuff- one of which was the cylinder base gasket leaking like a sieve. Well, I know why that is now, and I also discovered that someone had been in there before. I didn't take pictures, but it looks like it was probably run low on oil at some point, the cam journals and the "bearings" (for lack of a better term) in the head and the valve cover are totally wiped out, very deep grooves.  From what I know it's very difficult to repair aluminum in this way, so I'm trying to figure out where to go next.
       
      1. Have someone grind down the head and valve cover and fit actual bearings in since the aluminum is screwed, and have the cam ground down to match.  I have no idea what this would cost.
      2. Buy a replacement head+cam+valve cover.
       
      #1 I was hoping someone might have some advice on, but #2 seems like it'll (probably) be the more cost effective option.  However I'm running into some difficulty, it seems like the 2001 and 2002 models specifically use a different head part number,  11100-19B10, instead of  11100-19B01 like for all earlier models.  What exactly is the difference between them? There are obviously far more of the earlier heads because it ran for over 10 years.  Are they actually interchangeable? I've also noticed there are heads from the LT250EF that has 4 valve heads but also otherwise look identical.  Would those work as well possibly?  I'd like to not have to drop $500 on machine work or new heads on a $1300 quad that I'm already putting a bunch of new parts on.  Oh, and it has a new piston and the cylinder itself looks pretty good too, as I said someone was in here before me.
       
      Any help or advice would be greatly appreciated. I'll post pics of the carnage tomorrow.
         
       
    • Admin
      2006-2011 Honda Rincon TRX 680 FA/FGA Service Manual
      By Admin
      View File 2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      Submitter Admin Submitted 04/09/2024 Category Honda ATV  

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...