hangingon

If the bushing is bad you need to replace it. and then try to algin the front end make sure if you adjust the tie rod make sure each threaded end has enough threads in the adjustment sleeve. If the tie rod is bent that means your going to be increasing it's length you don't want one end hanging onto just a few threads and hit a bump or jump and have it come apart. It's better to fix it right and be safe if it's bent I would replace it for safety reasons.

Something I don't won't to do but have to do. Redoing our front porch lots of sanding. Our wonderful paint store mixed up indoor latex for our out door porch. First they were going to sell us coceret paint or stain we said no it's wood they said O ok. I should of double checked th can.

Looks like you guys had a good time.

How many keyboards have you gone thru? Congrats.

Vibby1 lol

quadnut is right on that one you need a good bottom end. You don't want to blow the bottom end out. the upper would give you more compression and alittle higher rpms and if the bottom is not strong enough to take it you'll be looking for a new motor.

I think elevation would slow it down but not skip. The higher you get the harder to breath same with a motor so if you cut off some of the breathing it robs power from the motor.