Quantcast
Jump to content


Im BACK!!!!!!!

Too_Late_I_Won

By Too_Late_I_Won
in New Members Area!

 Share

Recommended Posts

Too_Late_I_Won Rookie

Too_Late_I_Won

Posted
Posted

Hey guys & girls Just want to stop by and say hello. I've been a member since 2006 then got a new job and wasnt able to get online as much.  

 

Brief history about my self/situation. I had a Yamaha raptor 660 bored out to right at 700 in mint condition basically brand new. Only about 10 hrs on fresh rebuild. (not complainin just explainin LOL) We had a house fire (electrical) 11/9/16 We had to move out while house gets rebuilt. 12/5/16 our contractors said we have been robbed. So sometime over the weekend someone stole my 18' trailer, broke into my locked shed and stole my Raptor along with a bunch of other things like big oxy/acetylene tanks with torches and hoses, propane heater 150,000 BTU, Weedeaters and self propelled lawn mowers etc.etc. All behind a locked fence. Now on to the good news. 
I always thought once this ATV bites the dust or something happens Id like to get a 4x4....Well here ya go.

I bought a 2008 Outlander 800 4x4 Hadnt had time to ride it yet but this thing is a beast!!!! Insurance gave me $3200 and I bought this for $3200 So its not the best of shape there's several little maintenance things that it needs. Like the rubber boots on the intake and exhaust on the CVT, Valve covers are leaking a little, I have a maintenance light that says " Maintenance Soon Hi Cogswell Motor"  (after leanering from another forum looks like the dealer changed the message from change oil soon to this.  Kinda funny kinda not at the same time.  It does have a few other odds and ends that needs some TLC. I already bought a service manual. But other than this beast is in pretty good/fair condition. Starts right up runs good (I didnt really get to run it as hard as I wanted due to it being snowy/icy the day I test drove it. 

Looking forward to talking to you guys and learning more about these machines!!! 

I have a youtube channel https://www.youtube.com/user/2LateIWon/videos that I will post these how to fix it videos on to hopefully help people out in the future. Feel free to stop by and say hi there as well. (There is also videos of the house fire damage as well

first day home and in the snow.jpg

Pass side.jpg

seat redone.jpg

4x4 Visco-Lok.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • HSTAR
      1997 Yamaha big bear 350 Shift shaft issue
      By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • John Sinclair
      1992 yamaha big bear 350 carburator issues
      By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • McG75
      1996 Yamaha Timberwolf 4x4 Rear End Width
      By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • mehim
      In search of the backwoods nudist campsites and ready to select the right ATV.
      By mehim
      Hi everyone. 
      Let me explain the thread title. 
      My husband and I are very active in the nudist community, and we have stayed at many and most of the mainstream nudist and clothing optional campgrounds in the USA. We are now approaching our retirement and would like to start a podcast to share those off the road / backwoods / little known camping areas where nudity is allowed. We have purchased a 5th wheel camping trailer with a rear garage for the ATV and now need some good reports on the one to buy. 
      We are most interested in a side by side unit but would love to get your thoughts. 
      Feel free to stop by and say Hi and ask anything you would like to better understand what we are looking for in an offroad unit. 
      Thanks for reading and hope to hear from you. 

    • ResQ91
      Help with 1987 Yamaha Big Bear YFM350FWT Carb
      By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...